Show us What you're Working On

[Haljackey 17,385]

Some hilly terrain road/rail work.

 

Edit: connected the two highways

[CT14 2,486]

New industrial WIP:

[Gadam 38]

Trying to make a Roundabout Interchange with a OWR. Hopefully i got the traffic direction right.

[matias93 7,535]

Like the concept a lot, I'm such a fanatic of roundabouts!

In any case, the MHO roundabouts are a great alternative if you need something more compact; the only problem is that you have to be much more careful when doing the slopes, because the entire piece sits on flat terrain. Oh, and of course, the slopes have to be 15 metres deep, which is very unrealistic, but is bound to the MHW standard.

[Tyberius06 12,251]

Hello!

Well, I guess finally I arrived to the end of the update project of the SeaPort Project. I need to check some of the lots and update the readme file, but here are the finalized version of the latest lots. 

In the "same" time, I added a few more pieces to the (previously showed) wall set. Probably I have to add two-tree more pieces, but well, I'll see. And there was an other project aswell in the last couple of days what kept me busy. The last year I made a few transportation lot relot work (WMP Art Deco, Shinjuku East-West, ML El-Rail Terminal (transferSta), Sakuragicho El-Rail Terminus), but that was a bit messy, so I decided I remake the relots from scratch (because first time there was a lot of click here and there without knowing what the hell I was doing)... Well I won't make public release from the stations, they're just relot concepts.

1. SeaPort Project - Industrial Rail Yards - Warehouses and Canal Lock Transitions (SimGoober and SG-CAL)

2. Shinjuku East and West Wings

3. WMP Art Deco Station

4. Sakuragicho El-Rail Terminus

5. ML's El-Rail Terminal Station

6. Slope Side Wall Set (the stair and ramp just for conception, those are not part of the set)

 

See you next time!

 

- Tyberius

[rsc204 21,865]

15 hours ago, Gadam said:

Trying to make a Roundabout Interchange with a OWR. Hopefully i got the traffic direction right.

I too like the concept also. Being a Brit, pretty much every motorway junction in the country that isn't multiple motorways coming together is based on a roundabout interchange much like this.

I hope one day to make RHW/NWM modular roundabout interchange pieces for replicating just this kind of setup. Seeing as this is the "Show us" thread, here's a very early concept texture of that:

Obviously there's still a lot of work to do, this is just a concept. But I'd like to support the following:

• Both L0/L1 roundabouts with RHW running under/over.
• Support for RHW-C networks only - others may come later. But RHW-6C is basically a UK motorway.
• Either RHW-4 or MIS for the Exit/Entry slip lanes.
• Connections to AVE-6, TLA-5/AVE-4.

[Eggman121 1,052]

3 hours ago, rsc204 said:

I too like the concept also. Being a Brit, pretty much every motorway junction in the country that isn't multiple motorways coming together is based on a roundabout interchange much like this.

I hope one day to make RHW/NWM modular roundabout interchange pieces for replicating just this kind of setup. Seeing as this is the "Show us" thread, here's a very early concept texture of that:

Obviously there's still a lot of work to do, this is just a concept. But I'd like to support the following:

• Both L0/L1 roundabouts with RHW running under/over.
• Support for RHW-C networks only - others may come later. But RHW-6C is basically a UK motorway.
• Either RHW-4 or MIS for the Exit/Entry slip lanes.
• Connections to AVE-6, TLA-5/AVE-4.

Well well well.... I have a surprise for you

Just dusting off a bit of work I done ages ago.

-eggman121

[rsc204 21,865]

I think we're on similar pages here .

[tankmank 853]

I like the roundabout for the motorway, does look very British.

This is my CBD as it stands, i am just working out how i'm going to transition to the suburbs that are just out of the image. 

[pclark06 12,058]

Photoshop work to make my cities have brands that I see every day (along with other general pictures).

[CT14 2,486]

Saber's giant roller piece on the LA River:

 

[Mary Maurine Mayo 984]

 

hello I am currently working on a transit enabled freight train station. here is what I have gotton done so far.

[Haljackey 17,385]

Infrastructure chaos in the middle of nowhere

[Dreadnought 8,231]

Yo, guys --

Refresh my memory.

I know the "Pedmalls" work with commercial buildings.

Do they work with Residential lots ??  (Or do I wind up with abandoned buildings?)

[Fatjuice 253]

1 minute ago, Dreadnought said:

Yo, guys --

Refresh my memory.

I know the "Pedmalls" work with commercial buildings.

Do they work with Residential lots ??  (Or do I wind up with abandoned buildings?)

Only for commercials.

[matias93 7,535]

58 minutes ago, Fatjuice said:

Only for commercials.

Also for industrials, given there is some way to reach a freight exit, as a heavy rail line, even if is not directly connected to a lot, but across other industrial lots of the same density.

[Starglow 45]

I'm turning my attention to the north side of my cities' river, working to develop an industrial area in a tropical setting.

Here it is, viewed from the east:

Spoiler

City of Solaria

 

And on into the city of East Solaria:

 

[AsimPika3172 1,155]

Nice buildings! I love that! Also, nice roundabouts! Just waiting for next version of NAM for more nice roads, highways etc... Is more better have ONE WAY HIGHWAY!!!

[Haljackey 17,385]

Uh, wut?

Almost done, just needs a SB to WB connection.

[Haljackey 17,385]

One day later, and got that last connection in there.

Zoom in:

Zoom out:

[6StringShaman 112]

You've certainly a knack for this.

Absolutely beautiful, no one else even comes close.

In awe, and totally envious

[Fantozzi 4,068]

For me this page took more than 2 minutes to load - must be ~15MB or more. Sadly this thread reaches dimensions my connection (?) can't handle well anymore. Some of @Haljackey stopped after 1/3 (timeout?). And it's one of my favorites threads to visit... 

[rsc204 21,865]

Just made an STR addon for my RRW Ramps, find the updated package on the STEX:

49 minutes ago, Fantozzi said:

For me this page took more than 2 minutes to load - must be ~15MB or more

15MB is nothing... even before the images come into play, the site itself uses a hideous amount of memory/bandwidth. This is by no means unique to ST, but I can only dread to think how hideously un-optimised most web sites are.

"web 2.0" has a lot to answer for, no one tries to keep things efficient since they assume everyone is on the latest 100MB+ connections.

However, as displayed these images aren't that big, assuming they are not ridiculously high-quality, I don't think they should total 15MB. OK, it's not big (582x261px), but the image in this post is 21KB, it's called optimisation folks .

[Yarahi 1,823]

1 hour ago, Fantozzi said:

For me this page took more than 2 minutes to load - must be ~15MB or more. Sadly this thread reaches dimensions my connection (?) can't handle well anymore. Some of @Haljackey stopped after 1/3 (timeout?). And it's one of my favorites threads to visit... 

This has been one of my little "pet peeves" with ST as well for quite a while! Even though modern technology has improved internet connection, a lot of us out there still suffer from shared bandwith - which makes this situation slightly annoying...

There have been "rules" (ex: jpg >png due to file size) in place in the past to improve this situation, but it seems they are not being practiced much anymore

[matias93 7,535]

3 hours ago, Fantozzi said:

For me this page took more than 2 minutes to load - must be ~15MB or more. Sadly this thread reaches dimensions my connection (?) can't handle well anymore. Some of @Haljackey stopped after 1/3 (timeout?). And it's one of my favorites threads to visit... 

As I frequently use a cell phone metered connection to access the site, this is also a thing I have had to resolve somehow. This could be useful:

http://www.opera.com/de/turbo

Its a function that compresses images on a third party server before sending it to your device, reducing in an important measure the total downloaded size. Of course, that's not good for privacy (notwithstanding what the developers say), but for visiting public pages, I think there is no harm.

[Dreadnought 8,231]

Yo, guys --

I'm working on another city -- and it occurred to me that I might need a second opinion (or more).

 

 

(1)  Am I getting a bit carried away with the trees - ??

(2)  Would it look better with a bit of "sand" splashed in among the trees ?

[CT14 2,486]

FA-3 filler model preview:

[raynev1 1,886]

@CT14 They look pretty good and there is quite a demand for FA anything . Nice job . 

[matias93 7,535]

Beggining to recover the pace after the poxing of this morning. Luckily there was a backup from end august. This time I'll give more hierarchy to this train station and conventions center

[nos.17 5,242]

Working through an idea for some new prop families. Still have a few kinks to work out, though.