Show us What you're Working On

[Barroco Hispano 26,931]

Colossi of Memnon:

Version 1:

Version 2:

[Lucario Boricua 7,049]

     More plans for the South Rotan Alps!!     

 

The City of Drent is investigating the feasibility of developing these 4 land parcels! Candidate uses include an university campus, a public works depot, a city park and a rich neighborhood designed to look like a mountain village. Where should each of these go?

 

 

Lake Platinum could be getting a road make-over! The portion of Scenic Highway 15 bordering the lake to the east and south is being eyed for conversion into a hiking trail, and the direct road access to Mount Steel (due south) would be replaced with a road link going from Primary Highway 14 (solid red line from left to right), on the west side of the lake. This would reduce road traffic exposure impacts from 90% of the lake's perimeter to 60%, while also opening up a new hiking trail without removing additional forest cover around the lake.

[matias93 7,535]

11 hours ago, Lucario Boricua said:

Candidate uses include an university campus, a public works depot, a city park and a rich neighborhood designed to look like a mountain village. Where should each of these go?

Rich neighbourhood in green

City park in cyan

Depot in yellow

University in magenta.

[Barroco Hispano 26,931]

I think I'm going to release it today.

Zoom 6

[AP 3,591]

16 hours ago, Barroco Hispano said:

Colossi of Memnon:

Version 1:

Version 2:

That is SO cool! Are you using autocad?

[Kloudkicker 4,565]

12 hours ago, Lucario Boricua said:

The City of Drent is investigating the feasibility of developing these 4 land parcels! Candidate uses include an university campus, a public works depot, a city park and a rich neighborhood designed to look like a mountain village. Where should each of these go?

I would pick,

City Park

Public Works Depot

University Campus

Rich Neighborhood

[mitsos 12,959]

 

 

 

[Scaley McSlither 1,714]

52 minutes ago, Barroco Hispano said:

I think I'm going to release it today.

Zoom 6

OOOHHHHH!!!!! Love it. Perhaps you could be convinced to take on another "little" project? Years ago, SimGoober released a real tease. Would you be interested in making a proper version of both Argonath from Lord of the Rings?

SimGoober's single Argonath monument...

Both Kings of the Argonath in the movie...

I realize that this would be better off in the BAT Request thread but what the heck.

If you aren't interested, of course just ignore me... 

[Barroco Hispano 26,931]

@Scaley McSlither I have it!

I will release it as soon as I can.

@AP I use ZBrush (For sculpt)>Maya or 3DsMax(For retopology)>Substance Painter & Designer (For textures)>3DsMax for export

@The British Sausage I think the rocks will be posted on the STEX by the weekend. Btw, I have over 200 different rocks.

EDIT

Argonath Statue:

Texturing this will take a while.

 

[SIM-ple Jack 17,450]

Wanted to do a few things before the new year begins. One of them, blow up Bartertown.

[mattb325 28,891]

An old (long since demolished) building that used to stand in Sydney's Bligh St. I liked the sunken basement area...something that isn't too common in SC4 buildings.

Should be released soon 

 

 

[davide1983it 5,424]

This is my building in sketchup

But i can't import it in sc4 b.a.t. (gmax), the program go in crash

[bch0899 1,203]

I've completed the bat. Except I need some help, how do you change capacity of a building? I want the building to be a prop and I'm using a small square as the actual building, but the capacity is set way to low.

[Dreadnought 8,231]

1 hour ago, mattb325 said:

An old (long since demolished) building that used to stand in Sydney's Bligh St. I liked the sunken basement area...something that isn't too common in SC4 buildings.

Should be released soon 

 

 

Looking at the pictures -- this resembles some old pictures of German naval barracks I stumbled across. 

It's not a "dead ringer" -- but it might work out OK.  Won't know until I "plop" a few and play with the idea.

The more I look at my old "billeting project" -- it isn't up to snuff.

[RobertLM78 1,598]

51 minutes ago, bch0899 said:

Not sure about your question on capacities, though surely modding a boffin will see it shortly..... that said, the building looks perfect at the corner like that. 

[Rott 2,398]

Capacities and the like? I'm pretty sure all of that is done with the SC4 Plug In manager, you can probably make it a landmark if you want to plop it.

 

[Rott 2,398]

Meanwhile, have a little W2W almost ready while I level up my lighting skill

[bch0899 1,203]

11 minutes ago, Rott said:

Capacities and the like? I'm pretty sure all of that is done with the SC4 Plug In manager, you can probably make it a landmark if you want to plop it.

 

Yes, I'm using the plugin manager, and I think I see where you change the capacity, but I'm not sure how it works. What value would I use for a CS$ and R$ building this size?

[matias93 7,535]

2 hours ago, mattb325 said:

An old (long since demolished) building that used to stand in Sydney's Bligh St. I liked the sunken basement area...something that isn't too common in SC4 buildings.

Don't know exactly why, but it looks perfect for a train station

[Rott 2,398]

I believe 'capacity satisfied' is where that is done, I've not made any commercial or residential lots yet so I might not be the best to answer this one...

[+Guest 760649]

1 hour ago, davide1983it said:

This is my building in sketchup

But i can't import it in sc4 b.a.t. (gmax), the program go in crash

The reason for the crash is probably the file format of your textures. The program doesn't like PNG or TIF or BMP. use JPG

[11241036 5,115]

1 hour ago, bch0899 said:

I've completed the bat. Except I need some help, how do you change capacity of a building? I want the building to be a prop and I'm using a small square as the actual building, but the capacity is set way to low.

Do you mean job capacity? Search for the Capacity Satisfied property and raise it to your liking. The values there come in pairs, the first one is the job type, the second one the amount.

[korver 27,686]

[11241036 5,115]

And it's again me. I've been working on this small fishing port, at the outskirts of a large city, next to a road winding its way along the coastline.

[Haljackey 17,398]

Reconstructing a grossly over-capacity bridge approach.

[Barroco Hispano 26,931]

Work in progress:

3X3

[Simmer2 23,831]

FAST telescope is now in the game. For obvious reasons I have had to scale it down a bit. The lot is only 1x1 but the model covers an area of 12x12 tiles.

Here it is nestled in between hills and a forest.

[davide1983it 5,424]

Right All ok was PNG format  thank you for helping me  so i can continue a second skyscraper, that i deleted

 

[davide1983it 5,424]

[davide1983it 5,424]

3 minutes ago, davide1983it said:

This is a test and now i can import in Gmax..