Show us What you're Working On

[philforhockey51 4,220]

3 hours ago, JulianMIA said:

Playing with shadows...

I feel like tunnel portals without shadows fading into the dark just don't look finished so I've been working on the perfect tunnel entrance texture and I think I got it all the way on the right.  Version 17 hahaha...

Nice, yes all the way to the right is the best.

[jestarr 3,423]

4 hours ago, JulianMIA said:

I thought the roof building light looked great as an open door but then realized you might not have been going for that…

BTW the updated roof building was the perfect choice.  The roof work really finished the whole structure  

@JulianMIA Thanks, I'm glad you like it. All the lights on the doors are instances, so this makes the door too much brighter because of the texture I used. I'll probably use a darker texture similar to the one on the dock.

[Brian J. B. 134]

On 11/26/2024 at 5:42 PM, Barroco Hispano said:

@Krisman @Samu64d Great job! 

@SneakyDeaky Thanks! It is based on this palace 

@Brian J. B.I don't have a Patreon yet, I doubt people will subscribe . I was planning to open one to upload civilian ships and my terrain mods, but I haven't decided yet.

The model is a custom request so it's a private BAT for now. If I release it, I'd have to export gardens and a fountain to make the lot but I don't have those models right now so it would be a lot of work for me. 

Well, should you change your mind, I would do absolutely anything to have that beautiful palace in my capital! I would be more than happy to contribute to your PayPal, it's the least I could do for all the wonderful work you do.

[SneakyDeaky 1,130]

On 11/30/2024 at 8:39 PM, Dead_End said:

I think this is getting close to finished. I've replaced the parking lot with a diagonal corner section and add a broken bit of wall on the top to break up repetition. There's some more benches on the left and some flowers sprinkled across the lot as well.

Looking great! What kind of church is this inspired by? The type of architecture? Can't think think of much in the UK that looks like so I was just curious where the inspiration comes from.

[Dead_End 1,630]

9 minutes ago, SneakyDeaky said:

Looking great! What kind of church is this inspired by? The type of architecture? Can't think think of much in the UK that looks like so I was just curious where the inspiration comes from.

Just to clear up any misunderstandings: I only made the lot. The model comes from this file by @Barroco Hispano

It's a Scandinavian stave church.

[Rott 2,398]

Went back to this one and feel like I finally got the neon down decently...

[TheTimvh1 939]

Looks great.  Can't wait to download it once it's out.👍

[Lazarou Monkey Terror 1,838]

This is the downtown area I've been working on the past few months, an old tile I've redeveloped with modern skills and dlls 

Found out where the steam was coming from and bulldozed that. Some of the big tower estates to the right are named after famous Apes. 

 

[JulianMIA 1,609]

4 hours ago, Rott said:

Went back to this one and feel like I finally got the neon down decently...

I think you got it VERY decent... 

[justforfun 7,926]

And the second diagonal R$$:

[Dead_End 1,630]

And it's uploaded:

 

[nikoxlaux 255]

3 hours ago, Dead_End said:

And it's uploaded:

 

Stunnig

[nightbird615 1,440]

On 11/25/2024 at 12:33 PM, Barroco Hispano said:

 

Where can we find this STUNNING MASTERPIECE to download?   That is beautiful!    If anyone can provide a link that would be awesome.  Thank you!

[nightbird615 1,440]

10 hours ago, nightbird615 said:

Where can we find this STUNNING MASTERPIECE to download?   That is beautiful!    If anyone can provide a link that would be awesome.  Thank you!

Barroco Hispano , is there a link to where we can download that mansion?   If you don't have it, no worries.  Thanks!    That is beautiful work!

[Tyberius06 12,266]

18 hours ago, nightbird615 said:

Where can we find this STUNNING MASTERPIECE to download?   That is beautiful!    If anyone can provide a link that would be awesome.  Thank you!

8 hours ago, nightbird615 said:

Barroco Hispano , is there a link to where we can download that mansion?   If you don't have it, no worries.  Thanks!    That is beautiful work!

I don't think there was a link as Barroco is working on that model. I guess when he feels ready he might upload it to STEX eventually... It's a beautiful building for sure @Barroco Hispano

 

[Null 45 3,114]

Making the networks for agriculture zones and rail use separate textures.

In the base game rail, agriculture and landfill share the 0x08400000 dirt texture.

Here is the game's default network texture mapping table, all values other than None/None are the texture IIDs.

Spoiler

None[0]:
  0x00                      wealthNone  
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
ResidentialLowDensity[1]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
ResidentialMediumDensity[2]
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
ResidentialHighDensity[3]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
CommercialLowDensity[4]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
CommercialMediumDensity[5]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh  
CommercialHighDensity[6]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
Agriculture[7]:
  0x08400000                wealthNone
  0x08400000                wealthLow
  0x08400000                wealthMedium
  0x08400000                wealthHigh
IndustrialMediumDensity[8]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08200000                wealthHigh
IndustrialHighDensity[9]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08200000                wealthHigh
Military[10]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
Airport[11]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
Seaport[12]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
Spaceport[13]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh
Landfill[14]:
  0x08400000                wealthNone
  0x08400000                wealthLow
  0x08400000                wealthMedium
  0x08400000                wealthHigh
PloppedBuilding[15]:
  0x08200000                wealthNone
  0x08100000                wealthLow
  0x08200000                wealthMedium
  0x08300000                wealthHigh

 

 

[justforfun 7,926]

Making a diagonal R$$$ inspired by a Dutch building:

[Dead_End 1,630]

Same textures and props, different church model (this time by @Krio)

Would love to hear what people think on what to improve.

[TheMurderousCricket 5,107]

I got a little carried away with the SC4T... I was trying to make the topography of my region more interesting and natural. I need your opinion though!

Which version of this mountain do you prefer? Version 1 is about 1900m tall. Version 2 is approx. 1270m tall. Satellite view and farthest zoom.

React "Like" if you prefer V1 and "Thanks" if you prefer V2. 

Version 1

 

Version 2

[kschmidt 6,223]

New Chicago Bridgeport !

Bridgeport is the last industrial area I  now cover for this year ! East of McKinley Park this zone aswell show a variety of industries. This town conscist of three parts, adjacent to McKinley Park on the east side of the river downtown with a large highschool, the industrial area east and a more rural southside suburb Bridgeport South !

Where shall we start ? Bridge port Industrial area !

Local business have a airstrip available, some chemical and paper pulperise plant, paint factory, cement factory and some logistics !

Residential area; Interchange and local town !

Bridgeport South !

Little more manufactering industries. Local more suburban extension of downtown !

Bridgeport Downtown !

Still some area´s to fill up but City Hall, Civic and utility department and a great statue present !

Highschool soured in intelectual capital showing the high residential estate next door !

Enjoy !

 

 

[hugues aroux 3,867]

WestWindStreets updated .. 1.7.48 ... and [ WWS 1.7.48 Fabrik ] is also available on my Drive.

 

[simmering 2,743]

16 hours ago, kschmidt said:

Little more manufactering industries. Local more suburban extension of downtown !

Hi @kschmidt, That logistics yard looks really great. Is it made of plopped industrial fillers or did you create your own lot?

Another question, where would I find this building?

[kschmidt 6,223]

3 hours ago, simmering said:

Hi @kschmidt, That logistics yard looks really great. Is it made of plopped industrial fillers or did you create your own lot?

Another question, where would I find this building?

Hi, That are IRM plopped fillers . That logistics warehouse is the one of two soda factories, this case the Pepsi factory ! Sincerely yours,

Kschmidt

[Tyberius06 12,266]

5 hours ago, simmering said:

Hi @kschmidt, That logistics yard looks really great. Is it made of plopped industrial fillers or did you create your own lot?

Another question, where would I find this building?

SG Pepsi Cola Bottling Factory or something like that. It hasn't been officially rehosted yet IIRC. You can find the model however in one of the SG Industrial Model Packs. Lots will come when we will be there. No ETA though. Christmas season is busy for most of us in RL and there are other projects before I start sorting out an other batch of SG contents... You can read more about the reasons in the following post on Simtropolis.

 

 

[jestarr 3,423]

While trying to come up with a lot for the ACME Restoration Company, I started working on textures for this building. It's about 60% done. It still needs a bit of modeling also. I probably won't finish either of these before the new year. I'm going to my daughters for the holidays and my three granddaughters will take up most of my time.

[simmering 2,743]

I am still experimenting with New York style buildings.

[Barroco Hispano 26,931]

Sorry for the delay in replying guys... After a windows update, I lost access to my microsoft user and almost lost my plugins. I reinstalled windows and all the programs. I'm back now.

@Brian J. B. Any contribution is welcome!  I never thought there would be so much demand for palaces. @Bobelboy will help me with the lot so we will release the palace very soon.  

@nightbird615 @Tyberius06 

@Dead_End Beautiful lots!

[Barroco Hispano 26,931]

New asphalt textures?

or

I still need to figure out how multi fsh textures work so I can reduce the repetition a bit.

 

[hugues aroux 3,867]

1 hour ago, Barroco Hispano said:

I still need to figure out how multi fsh textures

It's quite easy to do with GoFSH: BMPs named [ID]-C0, -C1, ... and alpha BMPs named [ID]-A0, A1, ...

[Barroco Hispano 26,931]

@hugues aroux I've always found Go FSH complicated and have never managed to get it to create a FSH with IDs. This is the result I got. I have no idea what is causing the problem, maybe it is because my textures are HD (256x256)?

7AB50E44-0986135E-258C2004.fsh