BATs by Bipin

[Thin White Duke 4,072]

That dome thing that no one, not even you, seems to know what it, that's what sigifies you. You're the what-the-hell kind of person who goes outside the box and makes stuff that no one else would even think of. That, and obviously your incredible skills, is why we all love you! 

[Bipin 3,402]

For those of you following my posts from about a week ago, you may be aware of the fact that I'll be going in for surgery in regards to my wisdom teeth. Since that last post, a time has been decided on. The process is more complicated for me due to allergies, so I'll be out for a few days starting around Thursday or Friday most likely. Subsequent to that, I may be out for up to a week. Oh well, as they (sort of) say, "feces happens".

[cmdp123789 710]

Good luck on your surgery buddy! hope everything goes well... and please take your time!! I had it like 6 months ago, and it was so annoying.. of course they took 3 at the same time lol!!

[JP Schriefer 5,590]

Good luck, Bipin! Everything's gonna be ok.

We're waiting for you

[jaredh 195]

Wisdom teeth....might go great, might not.

 

I was eating solid food 30 hours later and back at work on Monday (after a Friday procedure).  But I've heard horror stories.

 

Make sure you hydrate like they tell you.........

[Bipin 3,402]

Wisdom teeth....might go great, might not.

 

I was eating solid food 30 hours later and back at work on Monday (after a Friday procedure).  But I've heard horror stories.

 

Make sure you hydrate like they tell you.........

 

Due to anaphylaxis, I will not be using general anesthetic, only freezing. While I anticipate it being fairly painful during the procedure and that it will take a bit longer, the doctors suspect I will recover more quickly and have less issues than those who use anesthetic, especially those who undergo an induced coma, which is typical for modern wisdom teeth procedures.

[MilitantRadical 2,844]

Don't worry Bipin, I had my wisdom teeth taken out with only freezing too. It wasn't that bad. Only weird seeing your teeth come out and not feeling it. I went back home on public transit with my mouth still frozen. People were looking at me strange. I got back home and realized I had blood dripping out of the corner of my mouth but couldn't feel it on my skin.

[MilitantRadical 2,844]

Oh and the pain wasn't that bad after either. They gave me a whole lot of T3s but I only used a couple, not cause I'm tought or anything, just because it wasn't so bad. I also don't like drugs that knock you out or make you really tired.

[Thin White Duke 4,072]

And here I am, fifteen years old, just waiting for those big bastards to grow out. -.-

[Bipin 3,402]

I have dealt with these sorts of things all my life, so as far as the pain issue goes, it is of minimal concern to me. Frankly, I'd rather be awake and watch what they are doing to me anyways. I've always been fascinated by medical procedures and it doesn't hurt to have another pair of eyes to make sure no one slips up, as unlikely as it is. On to happier news now, here's another rendition of the house:

 

 

I'm happy with the colour scheme, except for one detail.

 

 

I'm not sure if the beige siding, which suits the doors is more appropriate, or the white siding, which suits the fascia.

 

 

Help me decide! I hope you enjoy the progress, even it will be a bit stymied for the next little while. 

[Delecto 941]

Good luck Bipin.

 

For the house, the last one is better I think, but 2 versions is fine don't you think?

[T Wrecks 10,209]

Don't ask either/or questions in BAT threads. You are bound to get "both" answers.

[Bipin 3,402]

Don't ask either/or questions in BAT threads. You are bound to get "both" answers.

 

Good luck Bipin.

 

For the house, the last one is better I think, but 2 versions is fine don't you think?

 

By the time the first render finished, I just decided to begin the second. Why not have more houses, eh? I mean, it's not like every house out there is unique... *cough*the neighbours a few doors down who copied, then mirrored our floor plan*cough*. I'll be honest, that one really rustled my jimmies the first time I saw their house...

[Delecto 941]

 

Don't ask either/or questions in BAT threads. You are bound to get "both" answers.

 

Good luck Bipin.

 

For the house, the last one is better I think, but 2 versions is fine don't you think?

 

By the time the first render finished, I just decided to begin the second. Why not have more houses, eh? I mean, it's not like every house out there is unique... *cough*the neighbours a few doors down who copied, then mirrored our floor plan*cough*. I'll be honest, that one really rustled my jimmies the first time I saw their house...

 

 

mmmhhh...

[KonstantinII 1,106]

Good luck

[Thin White Duke 4,072]

I hate that you can only like entries once. Fix this, Dirk! 

[Aaron Graham 4,417]

I think it the beige is good, I think it's perspicuous for you to change the colors of the doors to match with the vinyl siding. I think you can also change the colors on the roof of the houses, it's variations and I think you can make more or edit more, all you have to do is edit an already finished model. When you finished with the model it's better to edited it so you do not have to make changes to each model, that can save some time.

[Bipin 3,402]

I think it the beige is good, I think it's perspicuous for you to change the colors of the doors to match with the vinyl siding. I think you can also change the colors on the roof of the houses, it's variations and I think you can make more or edit more, all you have to do is edit an already finished model. When you finished with the model it's better to edited it so you do not have to make changes to each model, that can save some time.

 

The beige house and the red brick house both have grey roofs. The initial model, which was show much earlier did indeed have a darker roof. Likewise, I'll be sure to use that darker roof for the pinkish-orange brick. I will also do two versions with brown roofs and siding/shakes. That's always a lovely combo. You can expect six different versions, which is fairly similar to the number you put out for your residential BATs; my inspiration!

[Bipin 3,402]

Here's what the Neo-Craftsman style houses will look like:

 

 

The resurgence of the Crafstman style of architecture is manifested in many residences built within the last few years.

 

 

I feel it's especially suited for this pack of houses. I hope you feel the same way.

 

 

Enjoy!

[JP Schriefer 5,590]

Nice job! 

It's cute *-*

[Huston 5,798]

Awesome, and I indeed do feel the same way! They look really great

[Thin White Duke 4,072]

Look at my Avatar, the car is amazing! ^^

[Ceafus 88 1,794]

Nice houses, I can't wait to have them growing in my city.

[Thin White Duke 4,072]

How'd the surgery go? 

[Aaron Graham 4,417]

Damn is look so good, I know when I make a city these houses will be in it.

[BLANKBLANK 4,414]

I would just like to give belated thanks to your Industry Essentials volume Bipin, I've been experimenting with your grunge concrete extenders and your grunge roads and it's pretty amazing. Finally a diagonal filler which is not only transparent on one side but is quite versatile in its ploppability and layout.

 

I do have one request though; could you please upload the grunge roads without the telephone poles? Or saving that include -- in a future update -- more grunge road pieces so as to allow a more easier continuity of the telephone poles?

 

I have tried devising a grid system with your roads but inevitably -- no matter which configuration I attempted -- I was still left with telephone wires connecting to a non-existent telephone pole. It's still impressive but I was wondering if you provide additional pieces to remove this little visual snag?

[SimGuy23 67]

I'm waiting for those tract houses.......and I'll get them as soon as I get my computer back in ;-). Either that or I'll just do the same on this old ailing computer and put all of the new files from here on my flash drive.

Your homes and industrial buildings are awaited.

[KonstantinII 1,106]

How tall (in meters) is a human in sketchup for sc4? I want to know for scale, to make the doors and vehicles. Some of my previous creations were not in scale with the humans as props in lot editor. I wanted to make a series of cylinders at different heights in sketchup and then render them to measure scale, but I consider it is too much time consuming. Can you help me just..?

[Jasoncw 11,840]

Hey guys, I'm passing along the message that Bipin's wisdom teeth removal didn't go as planned, and that he won't be around for a while while he deals with that and then catches up on rl.

 

Post your get well soons.

 

For those of you following my posts from about a week ago, you may be aware of the fact that I'll be going in for surgery in regards to my wisdom teeth. Since that last post, a time has been decided on. The process is more complicated for me due to allergies, so I'll be out for a few days starting around Thursday or Friday most likely. Subsequent to that, I may be out for up to a week. Oh well, as they (sort of) say, "feces happens".

[JP Schriefer 5,590]

I hope he got well soon. If you talk to him tell him that we are sending positive thoughts for his recovery.