Show us What you're Working On

[SIM-ple Jack 17,451]

1 hour ago, WolfZe said:

Will someone find himself who builds everything

Not sure what that means, but OK then!

Re-lotting residentials to reduce population sizes for more realistic cities. A 3x6 logging camp pop:150 becomes a 6x6 barracks. A 1x2 slum house pop:20 gets spread out over 4 houses. A 1x3 tenement pop:93 becomes a housing project 6x3 & 6x6.

[+Guest 760649]

Hospital end building left 2x1

 

[+Guest 760649]

Hospital end building right 1x1

 

[The British Sausage 5,449]

21 hours ago, Sloppyjoemess said:

More work to be done, but I ripped these straight from 10th ave in Midtown. Planning on doing a diagonal series but I have some geometry to figure out. I want to optomize these so that they can snap together into pre-formed blocks. This style of building is ubiquitous in Manhattan, but IRL many are ortho. 

Re-reading your comment made me realize I'm a bit off brief here. I think if we want to realistically create diagonal blocks in Brooklyn we'll have to pull source material from places that are angled that way IRL. Bed Stuy, Crown Heights, all the way out to Brighton Beach are all aligned to this grid. Are there any particular styles you'd particularly want me to capture? There are so many styles of brownstones there. Give me some addresses or street view captures and I'll help you out. I'd love to see what you're aiming for. cheers

These three city blocks are half a mile away from the southern point of Brooklyn Bridge and quarter a mile away from Downtown Brooklyn. The thing is I'm using less than 20 buildings when I recreate strictly w2w brownstone blocks and the thing is the buildings in these three blocks, highlighted in wood, would be more than enough for diagonal city blocks. It should be noted that the city blocks in this Brooklyn area are at a rough grid angle of 45 degrees direction compared with the most of the city blocks in lower Manhattan.

187-195 Amity Street. This is within the red area I highlighted in the first picture.

Also, thanks a lot for your efforts as well! I like the dirtier texture work you do and this is just great for SC4!

 

 

12 hours ago, WolfZe said:

Hospital end building right 1x1

 

NOICE! Would probably make a good 1x1 corner block too!

 

 

[Barroco Hispano 26,973]

Pinus Brutia:

2010 Mercedes-Benz C-Class

2018 Ford Expedition Max:

[WannGLondon 2,362]

22 hours ago, WolfZe said:

Rehearsal of the first three buildings

Love this! I had always wished there were more European-looking hospitals in-game!

[+Guest 760649]

Hospital gate house, today the seat of the stomatology 3x1.
That was the last building.

[SIM-ple Jack 17,451]

Water-less naval base

[Scaley McSlither 1,714]

@WolfZe any interest in doing this? Or are you sticking to northern Germany? Nibelungenbrücke in Regensburg...

[+Guest 760649]

It's not quite finished yet, but at least a first impression

[+Guest 760649]

1 hour ago, Scaley McSlither said:

@WolfZe any interest in doing this? Or are you sticking to northern Germany? Nibelungenbrücke in Regensburg...

The tower wouldn't be a problem. But that the bridge is really functional. As a fake for a canal, I can do that but over water is not my collar size.

[+Guest 760649]

1 hour ago, Scaley McSlither said:

@WolfZe any interest in doing this? Or are you sticking to northern Germany? Nibelungenbrücke in Regensburg...

Oh yes ... the bridge you are showing is NOT in Regensburg, by the way. The Nibelungen Bridge connects the Rhineland-Palatinate city of Worms across the Rhine with the Hessian cities of Lampertheim and Bürstadt.

[+Guest 760649]

[Scaley McSlither 1,714]

1 hour ago, WolfZe said:

Thanks for correcting me on that! I googled the location and it gave me the ugly one in Regensburg instead of this beauty!  

[Dreadnought 8,231]

@WolfZe

You could make this wide enough to be plopped on either side of the roadway -- and simply use the current Maxis bridges.  Or it could be placed at both ends of the bridge as a "gate".

Looks great, though.  I could make room for something like this!

[Diego Del Llano 5,206]

Edificio La Nacional Monterrey

Monterrey, México

Architect: Unknow. 

 

[watercitymadero 806]

omg I'm so excited, finally something from the city I live 

[Raymond7cn 6,776]

Woww! it's been a while, I love all your works here,  Sorry that couldn't quote all of you.

@WolfZe Thank you Wolf, Please finish it, Quite need your cube trees since i want to put it into my T21 mod.

Inspired by @korver's splendid CJ, i made a water from scratch, Thank you master.

Apocalypse prop which freaks @Terring out a bit.

And Transportation project on progress:

@dmn

Sincerely,

-- Raymond

[EffTheGrid 3,730]

On 9/20/2020 at 8:38 AM, The British Sausage said:

These three city blocks are half a mile away from the southern point of Brooklyn Bridge and quarter a mile away from Downtown Brooklyn. The thing is I'm using less than 20 buildings when I recreate strictly w2w brownstone blocks and the thing is the buildings in these three blocks, highlighted in wood, would be more than enough for diagonal city blocks. It should be noted that the city blocks in this Brooklyn area are at a rough grid angle of 45 degrees direction compared with the most of the city blocks in lower Manhattan.

Love the specificity! When I get home from work I'm gonna try to dive into this project. I like the variety of buildings involved

[Dreadnought 8,231]

@Raymond7cn

I'm not surprised that freaks them out --

Looks like something dark and sinister from Fritz Lang's "Metropolis" - 1927.

[korver 27,686]

[+Guest 760649]

WIP 2x1 prefecture

 

[+Guest 760649]

Now the prefecture is finished and I can insert it into my city

2x2 in size

 

[Scaley McSlither 1,714]

@WolfZe please tell me you'll upload this beauty!

[+Guest 760649]

15 minutes ago, Scaley McSlither said:

@WolfZe please tell me you'll upload this beauty!

The publication date is 02/31/.......

should mean .... no.

[Scaley McSlither 1,714]

2 hours ago, WolfZe said:

The publication date is 02/31/.......

should mean .... no.

Schade. 

[+Guest 760649]

[SIM-ple Jack 17,451]

1 hour ago, Scaley McSlither said:

Schade. 

English, por favor!

[+Guest 760649]

4 minutes ago, SIM-ple Jack said:

English, por favor!

In Hamburg we say ...Schade  (It's a shame) is the new " f.... you"....

[SIM-ple Jack 17,451]

6 minutes ago, WolfZe said:

In Hamburg we say ...Schade  (It's a shame) is the new " f.... you"....

I'm more familiar with the other German "S" word.