-
Announcement
-
Simtropolis Returns! 05/26/2026
See here for details about our site recovery efforts.
-
Search the Community
Showing results for tags 'british columbia'.
Found 32 results
-
Version 1.0.0
517 Downloads
Valemount between the Rocky, Monashee, and Cariboo Mountains is the fifteenth entry in my British Columbia series. This 5x5 large tile region is to scale at 419 km². Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions!- 1 Review
-
- 4
-
-
- sc4m
- mac version available
- (and 6 more)
-
Version 1.0.0
312 Downloads
Daajing Giids on the Haida Gwaii archipelago is the fourteenth entry in my British Columbia series. This 9x9 large tile region is to scale at 1359 km² and also includes the community areas of Skidegate and Sandspit. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions!-
- 3
-
-
- sc4m
- mac version available
- (and 6 more)
-
Version 1.0.0
468 Downloads
Coal Harbour on Vancouver Island is the thirteenth entry in my British Columbia series. This 5x5 large tile region is to scale at 419 km² and also includes the village area of Quatsino. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions!-
- 4
-
-
- sc4m
- mac version available
- (and 6 more)
-
Version 1.0.0
257 Downloads
Port Alberni on Vancouver Island is the twelfth entry in my British Columbia series. This 7x7 large tile region is to scale at 822 km² and also includes the community area of Beaver Creek. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions!-
- 3
-
-
- sc4m
- mac version available
- (and 6 more)
-
Version 2.0.0
120 Downloads
Nelson in the Selkirk Mountains on the West Arm of Kootenay Lake is the eleventh entry in my British Columbia series. This 8x5 large tile region is to scale at 671 km² and also includes the community area of Taghum. This was made after my original version of Nelson that lined up north-south. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Region rotation suggested by Reddit user antsel to line up Nelson's downtown grid. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
132 Downloads
Nelson in the Selkirk Mountains on the West Arm of Kootenay Lake is the eleventh entry in my British Columbia series. This 7x7 large tile region is to scale at 822 km² and also includes the community area of Taghum. Looks like I've uploaded 17 maps since starting a month ago. yeehaw! After this I also released a version of Nelson rotated 30 degrees to line up the downtown. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. A requested region for Reddit user denjin. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
232 Downloads
Penticton in the Okanagan Valley situated between the Okanagan and Skaha Lakes is the tenth entry in my British Columbia series. This 6x10 large tile region is to scale at 1007 km² and also includes the community areas of Summerland, Kaleden, Naramata, Faulder, Shingle Creek, and Okanagan Falls. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. A requested region for Reddit user wasted_viaticum. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
248 Downloads
Kelowna on the Okanagan Lake in the Okanagan Valley is the ninth entry in my British Columbia series. This 10x10 large tile region is to scale at 1678 km² and also includes the community areas of Okanagan Mission and Rutland of Kelowna, Lakeview Heights and Westbank of West Kelowna, Okanagan Centre and Winfield of Lake Country as well as Peachland. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. A requested region for @Multisyllabic Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
164 Downloads
Oh no! The Great Flood has happened and major communities and routes in BC and Alberta are underwater! It's up to you to rebuild on higher ground and conquer this hazardous landscape! After making separate British Columbia and Alberta versions I figured I might as well combine both maps into a single region. This 12x9 large tile region is definitely not to scale. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Region inspired by the "after the flood" scenarios in Railroad Tycoon II: Platinum Edition. Good luck mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
136 Downloads
Oh no! The Great Flood has happened and every major community and route in BC is underwater! It's up to you to rebuild and conquer the even more hazardous landscape of this province! A surprise entry in my BC series. Also contains some Alberta in the northeast. This 12x12 large tile region is definitely not to scale. I also have a 7x12 large tile Alberta after The Flood region available as well as a 12x9 large tile combined region of BC and Alberta after The Flood. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Region inspired by the "after the flood" scenarios in Railroad Tycoon II: Platinum Edition. Good luck mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
258 Downloads
Hyder, Alaska and Stewart, British Columbia are separated by the Hyder–Stewart Border Crossing. This 4x6 large tile region is to scale at 403 km². Half of this region is still in BC so I guess I'll still count it as the seventh region in my British Columbia series. Hyder is Alaska's easternmost town and describes themselves as the Friendliest Ghost Town in Alaska! Despite being landlocked and only being accessible by road from Stewart, it's a popular tourist destination for those wishing to visit Alaska without driving the length of the Alaska Highway. It's geographically American but runs on almost everything Canadian. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Photo by flickr user Philip Morton. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
203 Downloads
Hope is the sixth region in my British Columbia series. The District of Hope also includes the surrounding community areas of Kawkawa Lake, Silver Creek, Flood, and Lake of the Woods. This 5x3 large tile region is to scale at 252 km². Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
195 Downloads
Powell River on the Sunshine Coast is the fifth region in my British Columbia series. This 5x5 large tile region is to scale at 419 km². Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
148 Downloads
Bella Coola, the fourth region in my British Columbia series. This 8x4 large tile region is to scale at 537 km². Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
708 Downloads
The third region in my British Columbia series. This region is to scale at 822 km². Terrace is located by the Skeena River with the Hazelton Mountains to the east while the Kitimat Ranges of the Coast Mountains are to the west. The area boasts several hotsprings and sits on an active fault line that runs north–south. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
327 Downloads
The second region in my British Columbia series. The village of McBride area is to scale at 151km². McBride is located by the Fraser River and Horseshoe Lake in the Robson Valley surrounded by the Rocky Mountains and Cariboo Ranges. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun mayors! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
278 Downloads
Hi, it's my first SimCity 4 upload! The first of what will probably be a British Columbia series. This one for the Prince Rupert area is 268 km² and is pretty close to scale. Two versions are available to download: The SC4M file requires SC4 Mapper to set up. The png/config file for if you have a Mac or have preference for the ingame region import function. This version of the region requires downloading High Elevation Import Mods w Erosion Control Parameters and using "Mallow's Original 2500m.dat" file. Installation instructions are listed below. Note: The png/config will render somewhat different than the SC4M version. The first region screen preview shown here is the sc4m version with the Appalachian Terrain Mod, the second preview is the same with Cascadia Tree Controller applied, and the last preview is the png/config version with no mods. Region Installation Instructions for the png config version 1. Navigate to your SimCity "Regions" folder on your computer. 2. Create a new folder for the region in this folder and move the grayscale map png file and config file from this download into the folder. IMPORTANT: Follow the next few instructions so your region doesn't render underwater 3. Download High Elevation Import Mods w Erosion Control Parameters: https://community.simtropolis.com/files/file/16790-high-elevation-import-mods-w-erosion-control-parameters/ 4. Take only "Mallow's Original 2500m.dat" from the download and place it in your "Plugins" folders. 5. If you have any terrain mods such as the Columbus Terrain Mod, Middle European Climate Mod, or Appalachian Terrain Mod, etc. or related files you will probably have to temporarily remove them from the "Plugins" folder for the region to install correctly. 6. Launch SimCity 4 and load the new region folder you made. The region is flat but the tile layout is visible. 7. Hold the Ctrl+Shift+Alt+R buttons together which will display a file navigator in the upper left. 8. Navigate to the png file and select it. The game will show a screen as if it's loading a city tile. 9. Be patient and wait for the game to render the entire new region one tile at a time. Don not interrupt or switch away from this until it is completed and the game returns to region view. 10. Your region is done and ready to play! 11. After exiting the game, remember to remove "Mallow's Original 2500m.dat" and replace any Terrain mods in your "Plugins" you may have temporarily removed. Have fun! Click here for a spreadsheet of all my SimCity 4 regions! -
Version 1.0.0
865 Downloads
Harbour Centre is a Canadian skyscraper located in downtown Vancouver, British Columbia. Completed in 1977 it stands at 147 meters (482 ft) tall. Originally designed by WZMH Architects, the building features offices, shops/retail space, a food court, and of course the iconic two-story 360-degree observation deck and revolving restaurant, which is accessed by a separate bank of elevators that face outward toward the City during ascent and descent. Currently, the restaurant is named Top of Vancouver and the Observation deck is named Lookout Vancouver. The O-deck can be accessed by paying a fee in either Canadian dollars, digital Llamas or theoretical internet money. I can't speak to the quality of the food at the restaurant, but I assume you're probably paying more for the view than the meal. I guess if it's really not that good, there's a Fatburger in the food court downstairs... and a readily accessible "wash" room next to that. The version available for download here sits on a 2x5 lot and is available via the Landmarks menu. You can also access it quickly using the "LotPlop" cheat (find "TCC-Harbour Centre"). Nightlights currently not available (maybe sometime in the future, like around 2375). I took some "liberties" with the base, roof and other features of the building that differentiate it somewhat from the real world version. Retail outlets include: · BC Liquor Store · BC Lotto! · Fatburger To use, simply extract the .dat file from the attached .zip into your already overloaded SC4 Plugins directory. Enjoy, buddy... friend... guy! And remember, if something goes wrong, or if there's something else you don't like about this model... Blame Canada! Dependencies (Optional): RDQ HD Prop Pack (Darknight Version) - OPTIONAL Adds trees as shown in pictures. Note: search and download the Maxis Night version at SC4Devotion if you are using default Maxis Night.- 7 Reviews
-
- 26
-
-
-
- thecitiescenter
- harbour centre
- (and 8 more)
-
Just a little reminder that the Cascadia fault is there.
A Nonny Moose posted a topic in Current Events
6.6 Magnitude rattles windows In the last while, the whole ring of fire has been a little restless. -
Hey there, I was just wondering if anyone would like to share their mountain cities? I started a region that is pretty close to my town in Canada! The region has 800.000 sims so far happy almost thanksgiving to all Canadians!!
-
Version 1.0
12,541 Downloads
TD tower is located at 700 West Georgia Street in Downtown Vancouver, BC, Canada The skyscraper stands at 127 m or 30 stories tall and was completed in 1972. Included is a CO$$ Growable and Ploppable 3x3 lot 1565 CO$$ jobs Stage 8 Houston & Euro Tilesets Includes MaxisNite & DarkNite Versions, use only 1 of them Darknite version requires Day and Nite Mod No Dependencies -
Version 1.0
484 Downloads
G'Day Simtropians, Today I am presenting a map requested courtesy of JoeChang,Thanks mate. It is of Gwaii Haanas in the most southern Haida Gwaii off the coast of British Columbia. See me up CLOSE and personal. This is a real world map and is scale and terrain accurate. It was produced with dem and satellite data and is in .SC4M format. One is required to use Wouanagaine's mapper or terraformer to import the map into one's game. It measures 81.92km x 65.536km. A readme is included in the price and it contains links and instructions. I think that's all. Cheers -
Version 1.0
261 Downloads
G'Day Simtropians, This map I wish to present today is courtesy of a request from Flatsim here at Club Simtrop, Thanks mate. It is of his hometown, Vernon, British Columbia. See me up CLOSE and personal. This is a real world map and was produced with dem and satellite data. It measures 32.768km x 53.248km and utilising 16bit mapping technology it is in .SC4M format. Wouanagaine's mapper or terraformer is required for importation. The map is terrain and scale accurate. A readme has been included containing some links and instructions and a picture. I think that's all. Cheers -
Whack a Chilly, or should that be Chilliwack with a touch of frosting. Canada
drunkapple posted a file in Maps
Version 1.0
1,447 Downloads
G'Day Simtropians, This map I wish to present today is courtesy of a request from Flatsim here at club simtrop, Thanks mate. It is of the Fraser Valley and Chilliwack, BC. See me up CLOSE and personal. This is a real world map and was produced with dem and satellite data. It measures 49.152km x 49.152km and utilising 16bit mapping technology, it is in .SC4M format. Wouanagaine's mapper or terraformer is required for importation. The map is terrain and scale accurate. A readme has been included containing some links and instructions and a picture. I think that's all. Cheers -
Version 1.0
1,208 Downloads
G'Day Simtropians, This map I wish to present today is courtesy of a request from iMetropolis here at Simtrop, Thanks mate. Kamloops, BC is on the Thompson River and close to Kamloops Lake. See me up CLOSE and personal. This is a real world map and was produced with dem and satellite data. It measures 49.152km x 53.248km and utilising 16bit mapping technology it is in .SC4M format. Wouanagaine's mapper or terraformer is required for importation. The map is terrain and scale accurate. A readme has been included containing some links and instructions and a picture. I think that's all. Cheers *These look to be working great*
