Can't find it?... Ask here!

[bigblade 0]

Is there any mod that brings you 1x1 (or larger) filler pieces for various textures used in different mods (like grass, sandstone, dirt, etc..)?

They don't have to be functional, just eyecandy.

[Cyclone Boom 16,875]

Is there any mod that brings you 1x1 (or larger) filler pieces for various textures used in different mods (like grass, sandstone, dirt, etc..)?

They don't have to be functional, just eyecandy.

 

 

Here's a selection of filler lot packs, hope they're OK:

 

[KonstantinII 1,106]

 

Is there any mod that brings you 1x1 (or larger) filler pieces for various textures used in different mods (like grass, sandstone, dirt, etc..)?

They don't have to be functional, just eyecandy.

 

 

Here's a selection of filler lot packs, hope they're OK:

 

 

[cody.maverick16 0]

 

Do DAT files needed to be put in the Plugins folder without a sub-directory folder?

DAT files have to be in the plugins folder because they are dependencies for your lots. I think that you can make a sub folder inside the Plugins folder to hold your DAT files, if you want.

Hello,

I recently downloaded the japanese street side mod v2 (the mod that adds electric lines to your roads and streets). And I wanted to know why I can't see the electric lines and the telephone cables on my SAM streets.

If anyone could help, thanks.

I think it just adds extra props to maxis streets and not SAM streets. The creators might not have known about the existence of SAM or may not have used SAM.

 

Thanks!

[ROmeoBOT 23]

I would like to have some diagonals for the Paris set by porkissimo and xannepan. The only one I found is too deep to put near corners.

[AAA90 6]

Hello, I am looking for these files:

 

PEG_CDK-REC_205
PEG_MTP_RESOURCE_vol1
PEG-CDK_REC_PROP-PAK_VOL1

 

I'd be grateful if you guys could help me

[Magneto 316]

Here you go:

 

For the PEG_CDK-REC_205, I didn't find it on STEX. But you can surely grab it at simpeg.com (registration needed)

 

 

 

I would like to have some diagonals for the Paris set by porkissimo and xannepan. The only one I found is too deep to put near corners.

 

If you could be a little more specific, I think I can help.

[KonstantinII 1,106]

Anyone ever seen any functional ped mall tiles that will fit in an urban environment?  I am thinking brick or sandstone.  I really need them to have actual paths for the sims to walk on.  Using the MTP ped mall tiles that come with the NAM in downtown central park is kinda wrong.  All the other ped mall tiles do not have any paths to walk on, sims will walk on them but they are ultra generic.

 

This looks kinda sad in my ultra downtown area.  It looks especially sad because these are also urban pond canals, notice the brick around the edges and how badly it clashes with the MTP ped mall tiles.  I have bus stops at intervals along the border of my central park here and I really want to connect them to get maximum functionality out of my mass transit network, the picture of what I have, what I need to replace.

 

I hope you all got some good ideas, I really do not want to scrap this plan.

 

Thanks in advance you guys.

 

Which version of NAm do you have? I have the latest version and when you place the pedestrian walking areas you can place the TAB button on your keyboard and they change textures. Keep pressing the TAB button to cycle through the different possible textures. There is the familiar center pole one, a pavement one, concrete, plain grass, bricks, and even a trail.

[lhrob 213]

Does anyone have a link to the Industry Quadrupler v2.1 ...?

[Superbacon 380]

There was a large I-HT BAT I had a few years ago. It was a few stories high and had a capacity of around 6,000 I-HT workers. It was around 6x6 in size. It probably came with the CAM industrial lots way back when I had it. I remember it was mostly white, had an arch-like hangar-ish design to it and it was growable. Don't know it was ploppable, it's been nearly 4 or 5 years since. But if anyone knows what it is and/or where it is that'd be great.

[Magneto 316]

Does anyone have a link to the Industry Quadrupler v2.1 ...?

 

Here you go: http://kurier.simcityplaza.de/download.php?file=276

[lhrob 213]

 

Does anyone have a link to the Industry Quadrupler v2.1 ...?

 

Here you go: http://kurier.simcityplaza.de/download.php?file=276

 

 

Thank you, thank you, thank you SOOOO much.  I've been searching all over for it and couldn't find it.  I appreciate your help.

[elavery 1,013]

I am wanting to do some Mediterranean inspired building.  I have downloaded lots of suitable BATs, have a terrain and water mod, but what I am lacking are good rural  mods.  What are some necessary things to have to recreate French farms and other rural settings? Tree controllers?  I have seen some very impressive farms with some of the other Mediterranean-themed CJs.

[cody.maverick16 0]

This may seem a dumb question, But what is the difference of the lots, BATS, and 3D Models?

[cody.maverick16 0]

This may seem a dumb question, But what is the difference of the lots, BATS, and 3D Models?

Ah, Please disregard this comment!

[yayaya1 22]

Can someone post a link to any desert mod. i've been searching and all i get are an army of downloadable regions. believe me i tried.

[lhrob 213]

Look on this list to see if there's anything which will work for you.

 

Maybe this is something which will work for you:  

[yayaya1 22]

thank you, but it was not helpful though.

[lhrob 213]

What exactly are you looking for?

 

Maybe these will work (??)..... 

 

 

[KonstantinII 1,106]

the grass round skyscraper:

and the andrewtropolis tower

STEX link:

[KonstantinII 1,106]

There was a large I-HT BAT I had a few years ago. It was a few stories high and had a capacity of around 6,000 I-HT workers. It was around 6x6 in size. It probably came with the CAM industrial lots way back when I had it. I remember it was mostly white, had an arch-like hangar-ish design to it and it was growable. Don't know it was ploppable, it's been nearly 4 or 5 years since. But if anyone knows what it is and/or where it is that'd be great.

Is this the one?

 

 

 

How can I change my city's name?

[Gurning_Chimp 398]

CTRL-X 'whererufrom __________' (City name in the blank)

 

I'm afraid it only picks up on the first word though.

[Yarahi 1,816]

CTRL-X 'whererufrom __________' (City name in the blank)

 

I'm afraid it only picks up on the first word though.

use quotation marks around the name.. like so: "gurning chimp"

that way it picks up two separate words

[ROUSANDS 15]

hello, I need help.

 

someone could tell me where I find the following files:

 

-COBALTTOWER001

-IoliteSpire

-AndoverTowerOne

-CrystalPile

-JetersenFocsmann

-WRAVENNTWR

-LANSFAIREV1

 

thank you very much.

[Xander Dax 310]

 

hello, I need help.

 

someone could tell me where I find the following files:

 

-COBALTTOWER001

-IoliteSpire

-AndoverTowerOne

-CrystalPile

-JetersenFocsmann

-WRAVENNTWR

-LANSFAIREV1

 

thank you very much.

 

http://simcitymemo.seesaa.net/article/170431286.html

https://www.sc4devotion.com/csxlex/lex_filedesc.php?lotGET=2511

 

Hope that helps you out?

[Superbacon 380]

 

There was a large I-HT BAT I had a few years ago. It was a few stories high and had a capacity of around 6,000 I-HT workers. It was around 6x6 in size. It probably came with the CAM industrial lots way back when I had it. I remember it was mostly white, had an arch-like hangar-ish design to it and it was growable. Don't know it was ploppable, it's been nearly 4 or 5 years since. But if anyone knows what it is and/or where it is that'd be great.

Is this the one?

 

 

 

How can I change my city's name?

 

 

Not even remotely close but I'll take that one, too. Thanks.

[Ro-Bo 183]

Is there a BAT of Maybank Tower? The one in Kuala Lumpur.

 

[jason leo 485]

 

There was a large I-HT BAT I had a few years ago. It was a few stories high and had a capacity of around 6,000 I-HT workers. It was around 6x6 in size. It probably came with the CAM industrial lots way back when I had it. I remember it was mostly white, had an arch-like hangar-ish design to it and it was growable. Don't know it was ploppable, it's been nearly 4 or 5 years since. But if anyone knows what it is and/or where it is that'd be great.

Do you mean this

[Superbacon 380]

 

 

There was a large I-HT BAT I had a few years ago. It was a few stories high and had a capacity of around 6,000 I-HT workers. It was around 6x6 in size. It probably came with the CAM industrial lots way back when I had it. I remember it was mostly white, had an arch-like hangar-ish design to it and it was growable. Don't know it was ploppable, it's been nearly 4 or 5 years since. But if anyone knows what it is and/or where it is that'd be great.

Do you mean this

 

 

Very close but I already have that one. The I-HT lot I'm looking for has a similar design but has about 6,000 jobs.

[ROUSANDS 15]

 

 

hello, I need help.

 

someone could tell me where I find the following files:

 

-COBALTTOWER001

-IoliteSpire

-AndoverTowerOne

-CrystalPile

-JetersenFocsmann

-WRAVENNTWR

-LANSFAIREV1

 

thank you very much.

 

http://simcitymemo.seesaa.net/article/170431286.html

https://www.sc4devotion.com/csxlex/lex_filedesc.php?lotGET=2511

 

Hope that helps you out?

 

thanks