Show us Your Interchanges!

[Thin White Duke 4,072]

clhigh7: Experience, kid. Experience. 

[Haljackey 17,270]

Old school MHW Parclo and mosaic. Made in 2008.

Click for full size (large image)

[wasso38 10]

Old school MHW Parclo and mosaic. Made in 2008.

Click for full size (large image)

nice! but where you got the tall orange skyscraper in the very bottom?

[freshballin365 32]

For anyone familiar with the L.A. area, this is the 405 & 101 Interchange in the San Fernando Valley. These are two of Southern California's busiest freeways.  




405 Approaching 101 from South





405 and 101 Interchange



Looking South

[cromabianca 158]

For anyone familiar with the L.A. area, this is the 405 & 101 Interchange in the San Fernando Valley. These are two of Southern California's busiest freeways.  

405 Approaching 101 from South

405 and 101 Interchange

Looking South

Beautiful!

[Haljackey 17,270]

Great work freshballin365!

 

---

 

I have a new interchange / highway extension to show.

Click images for full size.

From this:


To this:


Zoom in:

[Thin White Duke 4,072]

I've got a simple, but nice diamond on/offramp intersection located just south of downtown Lorient, a mid size city in Serkis county, Tahoma. I'll show it soon.

[Thin White Duke 4,072]

DA DAAAAA!! 

 

The diamond, and a portion of Lorient just to accent it. 

 

 

Not much, but I'm not very skilled with the RHW either. I like making diamond intersections and thought this turned out well, so I thought I'd show it to ya! 

[GeometryMath Algebra 614]

Nice work! Simple, but elegant.

[metasmurf 705]

Rhw 3/2 t-interchange

 

 

[Thin White Duke 4,072]

Looks sweet! 

[SAVAGExPHOENIX 955]

Well done, Meta. You probably could have tightened up the loop with a different Y split, but overall it's really well done.

[Harry's Place 918]

Here's Kijng Carol Town junction. It's not as good looking as Haljackey's but it does the job as i planned. It's based on a junction south from my city. The ideea is that the vehicles that don't whant to enter the city will avoid the roundabout by taking the ramps. And the game exceeded my expectations The vehicles are using this junction just like I wanted

 

[Markus J 242]

It's always nice when you build something and the a game uses it exactly how you planned, I agree with that.

 

I took an old desgin of mine (it's in the RHW guide in Sc4devotion) and made it higher capacity and smoother.

 

 

Without decorations so you can see easier.

 

 

 

And with decorations, I mean landscaping.

 

Some bonus close ups

 

 

 

 

 

Good job everyone, and that one of the 405 and 101 is just amazing.

[wasso38 10]

Great work freshballin365!

 

---

 

I have a new interchange / highway extension to show.

Click images for full size.

From this:

To this:

Zoom in:

where you got the white train station in the last photo? can you give me the link?

[data7 98]

It's always nice when you build something and the a game uses it exactly how you planned, I agree with that.

 

I took an old desgin of mine (it's in the RHW guide in Sc4devotion) and made it higher capacity and smoother.

 

Some bonus close ups

 

 

 

Very nice! However - You have meesed up directions in the pic above

[timmetje 75]

WOW, Markus, your interchange looks really good!!

after looking in this topic for a while, I thought I could show something I made, this is the place where intercity highway 1 branches of interstate 101 in a yet to be build up ghetto/port area. the one thing i ain't that pleased about is the overpass

any suggestions?

 

[Thin White Duke 4,072]

WOW, Markus, your interchange looks really good!!

after looking in this topic for a while, I thought I could show something I made, this is the place where intercity highway 1 branches of interstate 101 in a yet to be build up ghetto/port area. the one thing i ain't that pleased about is the overpass

any suggestions?

 

 

I don't think it looks too bad, but I can see what you mean. My tip is to make it like a tunnel, using ground raiser/ hole diggers. It would make the interchange a bit bigger, but I think it would be worth it. After all, most real life intersections are big, right?

[Pioneer 140]

WOW, Markus, your interchange looks really good!!

after looking in this topic for a while, I thought I could show something I made, this is the place where intercity highway 1 branches of interstate 101 in a yet to be build up ghetto/port area. the one thing i ain't that pleased about is the overpass

any suggestions?

 

Use FAR pieces instead of the default curves.

[Thin White Duke 4,072]

Pioneer: There is no raised FAR. 

[TopDeej 254]

WOW, Markus, your interchange looks really good!!

after looking in this topic for a while, I thought I could show something I made, this is the place where intercity highway 1 branches of interstate 101 in a yet to be build up ghetto/port area. the one thing i ain't that pleased about is the overpass

any suggestions?

 

 

*cracks knuckles* 

Alright I think this would be better, It takes up a bit more room but looks much nicer.

 

[NielsC007 499]

High capacity interchange!

 

[Haljackey 17,270]

Nice work NielsC007!

 

 

 

 

WOW, Markus, your interchange looks really good!!

after looking in this topic for a while, I thought I could show something I made, this is the place where intercity highway 1 branches of interstate 101 in a yet to be build up ghetto/port area. the one thing i ain't that pleased about is the overpass

any suggestions?

 

 

 

*cracks knuckles* 

Alright I think this would be better, It takes up a bit more room but looks much nicer.

 

 

 

Good alternative, although I'd rather have the RHW-10 to dual RHW-6S splitter just used for the exit. In the entrance setup, the leftmost entering lane simply merges with the rightmost through lane which is kind of dangerous. Transitioning the entering lanes to a RHW-4 will give you two dedicated entrance lanes, similar to what you have now, timmetje.

 

Just my 2¢. Great work!
 

[timmetje 75]

Nice work NielsC007!

 

 

 

 

WOW, Markus, your interchange looks really good!!

after looking in this topic for a while, I thought I could show something I made, this is the place where intercity highway 1 branches of interstate 101 in a yet to be build up ghetto/port area. the one thing i ain't that pleased about is the overpass

any suggestions?

 

 

 

*cracks knuckles* 

Alright I think this would be better, It takes up a bit more room but looks much nicer.

 

 

 

Good alternative, although I'd rather have the RHW-10 to dual RHW-6S splitter just used for the exit. In the entrance setup, the leftmost entering lane simply merges with the rightmost through lane which is kind of dangerous. Transitioning the entering lanes to a RHW-4 will give you two dedicated entrance lanes, similar to what you have now, timmetje.

 

Just my 2¢. Great work!

 

 

Thanks for the help guys, I'll try to make it somewhat like this, but first I have to see how much space I have left when I finish the railyards

 

Just checked out my options, and it won't fit, so I'll just keep it like this I think

  Edited January 4, 2014 by timmetje  

[Haljackey 17,270]

 

Nice work NielsC007!

 

 

*cracks knuckles* 

Alright I think this would be better, It takes up a bit more room but looks much nicer.

 

 

 

Good alternative, although I'd rather have the RHW-10 to dual RHW-6S splitter just used for the exit. In the entrance setup, the leftmost entering lane simply merges with the rightmost through lane which is kind of dangerous. Transitioning the entering lanes to a RHW-4 will give you two dedicated entrance lanes, similar to what you have now, timmetje.

 

Just my 2¢. Great work!

 

 

Thanks for the help guys, I'll try to make it somewhat like this, but first I have to see how much space I have left when I finish the railyards

 

Just checked out my options, and it won't fit, so I'll just keep it like this I think

 

 

 

Looks like you can still put in that 3 lane exit if you want. Also for the other side you could move it a bit more inward:

 

 

Please excuse the crappy paint job

[timmetje 75]

 

 

Nice work NielsC007!

 

 

*cracks knuckles* 

Alright I think this would be better, It takes up a bit more room but looks much nicer.

 

 

 

Good alternative, although I'd rather have the RHW-10 to dual RHW-6S splitter just used for the exit. In the entrance setup, the leftmost entering lane simply merges with the rightmost through lane which is kind of dangerous. Transitioning the entering lanes to a RHW-4 will give you two dedicated entrance lanes, similar to what you have now, timmetje.

 

Just my 2¢. Great work!

 

 

Thanks for the help guys, I'll try to make it somewhat like this, but first I have to see how much space I have left when I finish the railyards

 

Just checked out my options, and it won't fit, so I'll just keep it like this I think

 

 

 

Looks like you can still put in that 3 lane exit if you want. Also for the other side you could move it a bit more inward:

 

Please excuse the crappy paint job

 

 

thanks for all the input guys, but I've come up with a solution, I'll show it asap

[NielsC007 499]

 

 

 

Nice work NielsC007!

 

 

*cracks knuckles* 

Alright I think this would be better, It takes up a bit more room but looks much nicer.

 

 

 

Good alternative, although I'd rather have the RHW-10 to dual RHW-6S splitter just used for the exit. In the entrance setup, the leftmost entering lane simply merges with the rightmost through lane which is kind of dangerous. Transitioning the entering lanes to a RHW-4 will give you two dedicated entrance lanes, similar to what you have now, timmetje.

 

Just my 2¢. Great work!

 

 

Thanks for the help guys, I'll try to make it somewhat like this, but first I have to see how much space I have left when I finish the railyards

 

Just checked out my options, and it won't fit, so I'll just keep it like this I think

 

 

 

Looks like you can still put in that 3 lane exit if you want. Also for the other side you could move it a bit more inward:

 

Please excuse the crappy paint job

 

 

thanks for all the input guys, but I've come up with a solution, I'll show it asap

 

 

You could also use the C3 exit located at the end of the FAR interchanges tab cycle.

[timmetje 75]

Nice work NielsC007!

*cracks knuckles*

Alright I think this would be better, It takes up a bit more room but looks much nicer.

Good alternative, although I'd rather have the RHW-10 to dual RHW-6S splitter just used for the exit. In the entrance setup, the leftmost entering lane simply merges with the rightmost through lane which is kind of dangerous. Transitioning the entering lanes to a RHW-4 will give you two dedicated entrance lanes, similar to what you have now, timmetje.

Just my 2¢. Great work!

Thanks for the help guys, I'll try to make it somewhat like this, but first I have to see how much space I have left when I finish the railyards

Just checked out my options, and it won't fit, so I'll just keep it like this I think

Looks like you can still put in that 3 lane exit if you want. Also for the other side you could move it a bit more inward:

Please excuse the crappy paint job

thanks for all the input guys, but I've come up with a solution, I'll show it asap

You could also use the C3 exit located at the end of the FAR interchanges tab cycle. I've come up with something already, I will show it tonight

[TopDeej 254]

Cant wait to see!

 

Here's a behemoth I undertook earlier, took only about an hour and a half to build.

To say the least, I'm pleased.

 

 

Enjoy!

[nathanthemayor 1,261]

It's been a while since I've last posted in this thread. A new interchange I created, tried to recreate the I-90/I-294/I-190 Interchange near O'Hare Airport, what do you all think?

Google maps of actual interchange