dekiscool

Not that I know of. It seems fine...

Thanks for reminding me how to get into God-Mode. However, I believe I make the water deep enough. The land is flat too...I use the grid to make sure it is. Oddly, I made a wide area to plop 2 sea ports. I placed the port with three cranes down in the left corner and then tried to place the port with 2 cranes down, but it wouldn't turn blue to plop. So I deleted the port with 3 cranes and replaced it with the port with 2 cranes...then brought up the port with 3 cranes...and it would plop! I don't know why. @Reform...Thanks I will check out the tutorials...

Thanks so much. I think I dl'ed everything and it seems to work now. But my biggest issue now is getting the shores just right to plop these seaports. They seem to be VERY fickle about where they will go. Very irritating. I wish there was a "Seaport For Dummies" where it gives STEP BY STEP instructions on how to do these. I can get it sometimes...but not everytime. It seemed easier with the default seaports vs the PEG ones.

Hey Capt...thanks so much. That seemed to do the trick. Much appreciated!

Let me know what you find. I will also check out the Opps Mod and I will check out the lot editor too. Thanks

Ok so I tried this one Ltw recommended...I ended up googling the dependencies to download because I couldn't really find them on the PEG site. So I loaded it all into my plugin folder and opened the game and deleted the old seaport...fixed the land and then FINALLY plopped the new seaport...and this is what I got What I want to know...1...what is missing other than cranes? And while it shows that cars can get to it, the roads don't actually connect to it...it looks like cars have to turn around. And do I just plop railroad track to it like the road?

I have the 2 vols of bldg_props...bldgprop_vol1.dat and bldgprop_vol2.dat. Not sure what it could be that I am missing.

Ok...I went through and found one of the dependencies had dependencies. So I downloaded those and checked to make sure that none of those had any dependencies. I installed them. I started the game and tried to plop the post office again. This time, as I was getting ready to plop, the "ghost" building still had the box, however, I could see what was supposed be there through the box...almost like a double ghost image...there was a truck in the box. But when I actually plopped the building, the box became solid and is still there. Not sure what else is missing. I downloaded it because it had 5 stars. As far as I can tell, all the dependencies are up to date.

I installed an airport pack to build my own airport. Of course I got ridiculous and built a giant airport...lol. Anyways, my computer crashed and thankfully I had a backup of all my SC4 files. I reinstalled Win7 and put my game back on...love the fact that I can download it anytime from Amazon.com. I finally got back around to playing SC4 and at first glance, everything seemed fine. Then I got to the airport I built and I saw this on the runways... These white things with the red circles and dots. Any idea what could cause that?? Thanks in advance!

I just built several lots for Agriculture. I used the ? tool to see what it was and it said something about Freight time - Long. What does that mean? I did put a road on one side of it and a railroad on the other side. What else can I do? Thanks in advance....

Hmmmm...strange it worked before...I mean...the runways still work...guess thats all that matter.

My game is v 1.1.641.0. I can try to "reinstall" the airport with a fresh copy. I don't think I am missing anything though. I replaced all the files in the same directories.

I have DL'ed a few new building mods for SimCity 4. I have been sticking to 4 and 5 star buildings only. Since I have been playing with the new SimCity 4 I bought, I have been putting all mods in the C:\\Users\UserName\MyDocuments\SimCity 4\Plugins on Win7. I was told never to put the mods into the Plugins folder under Program Files. I have found most of them, except some just don't seem to show up. I have looked under all the categories in the game. Any ideas? Also I DL'ed this - Vega Trade Center... and the lot appears, but the buildings are not there. It doesn't look like the picture.

I used LotPlop and finally found the buildings. Thank you! I got it from buying it on Amazon.com as a download.

I tried the PlopAllBuildings, but found it plops all the buildings on its own. I want to be the one to plop the buildings myself...and search through all the lots.

I tried the PlopAllBuildings...and it started plopping buildings by itself. I wanted something where I could do it myself. But the one I can do myself, I can't find the buildings I am looking for.....hmmmm....

Hey...this is cool. Love listening to my favorite tunes...

Ok...so I used the cheat.dll thing. Still can't find the buildings I downloaded. However, if I use my lot editor, I can search and find them. But I can't find them in the game. Not sure why? I may have to go through all the crap of making the lots ploppable...

Thanks...just realized I had the Cheat.dll thing...just forgot I had it...or even how to access it. LOL Dur dur dur!!

Is there a way to make a growable lot into a ploppable lot? One of the lots...and didn't realize it...it must be a growable because it says CS$? Here is a link Here is the tv station...but it doesn't say growable or ploppable Those are just a couple of the things that don't appear.

Ok...clicked on the graph and this is what I see...I know it is not a $ symbol used...but it is the closest thing I could think of... Industry I-Ag - no bar I-D - At least 5500 demand I-M - At least 5500 demand I-HT - At least 6000 demand Residential R$ - At Least 5500 demand R$$ - At Least 5500 demand R$$$ - At Least 3000 demand Commercial Cs-$ - 6000 demand Cs-$$ - 2000 demand Cs-$$$ - minus 4000 Co-$ - minus 6000 Co-$$ - minus 6000 As far as this goes...Residential is pretty straight forward. However, Industry and Commercial, they have more than what's in the menu. So if I go to zone, say Industry...I click on the tiles in the menu...the choose Industry...and I see Agriculture, Medium Density and High and dezone tool. So if there are IAg, ID, IM and IH...what do I use for ID? Or the same for Commercial...only 3 choices besides the dezone tool...so how do you get Cs-$ vs Co-$??

Wow...do I feel like an idiot! LOL. I didn't know you could click on the graph...never thought to do that. Thanks for the info....

How do I know if I have a demand for it? I see I have a demand for Residential, no demand for Commerce...and demand for Industry. Do I just wait until something pops up and says...we have a demand for agriculture?