[MOD Pack] Plop Outside City Box & All my others

[Beelzebub420 7]

@ProcsKalone:

 

I'm not so sure when you say that the BOC mod is no longer needed.

 

It's true that players can build outside the box and even zone with Orion, but...Orion is actually a lot more limited than the BOC mod when it comes to available space. Even within the 3k x 3k space that Orion offers, there are huge stretches of land where you cannot build nor plop anything, while you CAN plop everything of the BOC mod in those dead spaces.

 

When you plop something in a dead space, no "Snap point" appears, no items of Orion can be used, not one ploppable RCI building can be used, and you need the BOC's road tool to be able to draw roads outside the 2k x 2k original city box in Orion.

 

I'm convinced that if all ploppable RCI is to be implemented into your BOC mod, players will be able to build everywhere in the region, also in the so called "dead spaces".

 

I understand that implementing all RCI into the BOC will be a tremendous amount of work, so therefore I would like to propose if it can be tried to ask as many modders as may be, if each of them are willing to implement a few RCI buildings into the BOC mod, until all RCI has been implemented.

 

I've asked Xoxide whether or not there were plans to convert all RCI of the Cities of Tomorrow to ploppables, of which he said that there are over 500 different RCI CoT buildings that are actually an extension of the default RCI.

 

So that proposes a challenge, but if all those buildings are converted into ploppables, and implemented into your BOC, SimCity will be loved by everyone, even the haters.

 

Because of this, I really want to beg you to reconsider.

 

Orion is wonderful, but it is not everything. Your BOC mod is. The entire region can be build full using your mod. You cannot build the entire region full using Orion.

 

I think that the next focus of the modders should be to implement all RCI into the BOC.

Everyone could see how delighted the community would be if they did.

BOC with the new ploppables would be awesome! I still use BOC for the 2 sides Orion cannot build on.

[xoxide 377]

IMO I think proc needs to make some changes to BoC and keep it going.. Its an original it was the first and it also allows using his methodology for those whom wish to plop and place items on the opposite 2 sides of the city

 

Orion is a step in the right direction however BoC is still one of the best tools ever released for SimCity 2013 and that has not changed

 

XoXiDe

Jeff

[Agente Silva 28]

I have One disaster After an other! Really, once every 4-5 days!

Is it possible that this related to this Mod? (I messed up with Upgrade of the University)

Regards

 

Actually that happened to me after installing BoC... It reactivates Disasters in game settings. Just go to game menu and disable them back.

 

After a couple of weeks using BoC I still say it´s the best mod out there, completely "issue free" (beware that Orion will mess with a lot of vitals to the game).

 

p.s: I haven´t read Xoxide last post when writing mine

[Blue Keiko 39]

@ProcsKalone:

 

The ploppable RCI from NiclistinRedd evolve to Cities of Tomorrow buildings.

There is no need to implement anymore then that there already are.

 

But I guess that you knew that already, didn't you?

[xoxide 377]

Blue Keiko .. talking to one of the original RCI Zone Building developers they are controlled by influence to spawn the building of CoT's.

 

We have to figure out if its possible to actually set the value to one that would allow them to grow in future mode.. ALSO CoT's maybe required to even happen ..

 

Do not yet know

[Blue Keiko 39]

@Xoxide:

 

I really wouldn't know if one must have CoT DLC as I already have it.

 

I was looking for this very tall commercial building through the RCI menu, but couldn't find it. That's when I realized that it was actually an CoT building. They are already in there. There is no need for further work on them.

[xoxide 377]

@Blue Keiko same here.. that's why i'm having trouble testing some ideas I have everything hahah.. when we started all of this we were worried more about not having something.

 

Now during testing I wish we had ways of telling the system to ignore things we have as part of the settings.  Do not use CoTs Do not use Checkbox DLC 1 2 3 4 5

 

something like that would be valuable to the community

 

XoXiDe

[Blue Keiko 39]

@Xoxide:

 

All the mods we can do away with, but can't you temporary delete the CoT DLC and download it again later from EA/Maxis's shop?

[xoxide 377]

if your account requires it .. upon start system would check for its existence.. and download it again.. we would need more refined controls

[Blue Keiko 39]

@Xoxide:

 

You can always ask someone of the community if they still have only SimCity without Cities of Tomorrow and the RCI plop mod to find out.

[Blue Keiko 39]

@ProcsKalone:

 

Hi,

 

The second last version of the BOC gave double the amount of building modules, but the current one does not. I want to ask you if you are willing to reinstate double modules if and when you're going to update BOC.

 

It comes in handy when your city grows so big.

 

Capton released a lot of mods that raise building statistics and the amount of modules, but for some reason the mods do not work with BOC. The buildings their statistics are all blurry with text, and say: "Locked by Mayor' in red, and lock themselves again right after you unlock them. it occurs both with default and BOC ploppable buildings.

 

When I told Capton, he said that he is also experiencing that, and that he didn't knew what caused it.

 

I was hoping that you would know.

[DamienMB 58]

The second last version of the BOC gave double the amount of building modules, but the current one does not.

 

It's working for me on both 0.98o and p: https://i.imgur.com/pY71x5E.png

 

Are you running any other mod scripts? Check your Packages folder.

[Blue Keiko 39]

@DamienMB:

 

There are 7 files in my Packages folder;

 

1 aPackScripts.package

1 multipleLandmarks.package

1 Universal Street Script.package

Mods HighMoney Residentiel.package

Mods HighMoney-Commercial.package

Mods HighMoney-Industry.package

Oppie Tram Scripts.package

 

The HighMoney mods do not work because, according to the modder, I'm missing a script file, but I do not know where to get it from.

 

Prior before ProcsKalone removed the BOC, I had the second last version. That time the double module count worked fine. But ever since I installed Orion it stopped working.

 

I then updated the BOC to the latest version but it still only allows the default module amount.

[murxianico 0]

Hey everyone,

 

I have a problem with free roam camera. I have ProcsKalonePackagev098p and I copied everything in its folder.

When I'm playing, I can't move the camera out the city. I try to use the keys shift+ A, D, S, W but there is any answer.

 

Is anything wrong? I you can help me I will be so nice. 

 

Thank you so much

Cheers

[Blue Keiko 39]

@murxianico:

 

Hi,

 

Have you tried to, "start a new city, exit SimCity, and restart?" I thought that like Orion, you need to do that first before you can use it.

[murxianico 0]

@murxianico:

 

Hi,

 

Have you tried to, "start a new city, exit SimCity, and restart?" I thought that like Orion, you need to do that first before you can use it.

Hi Blue Keiko,

 

I did you wroteme  but I hadn't any success. Do you have another suggestion?

 

Thanks

[Blue Keiko 39]

@Murxianico:

 

Do you have Orion installed? I thought it has the free Roam Camera mod included. If you have, then you'd best try to ask Xoxide for help. He's one of the head modders, and founder of Udon and Orion.

 

Hope this helps.

[murxianico 0]

@Murxianico:

 

Do you have Orion installed? I thought it has the free Roam Camera mod included. If you have, then you'd best try to ask Xoxide for help. He's one of the head modders, and founder of Udon and Orion.

 

Hope this helps.

Thank you very much Blue Keiko. I still have the same problem. I reinstall Simcity and I install BOC mod, this version (ProcsKalonePackagev098p). I started a new city, exit SimCity, and restart but the problems stilll go on. I can out from the city box and If I try to move the cam with the Keys ( Alt + A,D,W,R,F) I don't have any result. What is the problem? If anyone know I will be so glad. I don't have any mods, then why doesn't I work well? 

 

Thanks a lot!

[Yayie 311]

 

@Murxianico:

 

Do you have Orion installed? I thought it has the free Roam Camera mod included. If you have, then you'd best try to ask Xoxide for help. He's one of the head modders, and founder of Udon and Orion.

 

Hope this helps.

Thank you very much Blue Keiko. I still have the same problem. I reinstall Simcity and I install BOC mod, this version (ProcsKalonePackagev098p). I started a new city, exit SimCity, and restart but the problems stilll go on. I can out from the city box and If I try to move the cam with the Keys ( Alt + A,D,W,R,F) I don't have any result. What is the problem? If anyone know I will be so glad. I don't have any mods, then why doesn't I work well? 

 

Thanks a lot!

 

 

Tried "Settings > Gameplay > Planning Mode Camera > Checked" ?

[murxianico 0]

 

 

@Murxianico:

 

Do you have Orion installed? I thought it has the free Roam Camera mod included. If you have, then you'd best try to ask Xoxide for help. He's one of the head modders, and founder of Udon and Orion.

 

Hope this helps.

Thank you very much Blue Keiko. I still have the same problem. I reinstall Simcity and I install BOC mod, this version (ProcsKalonePackagev098p). I started a new city, exit SimCity, and restart but the problems stilll go on. I can out from the city box and If I try to move the cam with the Keys ( Alt + A,D,W,R,F) I don't have any result. What is the problem? If anyone know I will be so glad. I don't have any mods, then why doesn't I work well? 

 

Thanks a lot!

 

 

Tried "Settings > Gameplay > Planning Mode Camera > Checked" ?

 

Hello Yayie, yes I checked and it still the same...I can not move the camera a long the map...how is that possible?  Do I have to use any keys? thanks

 

P.S: Could you help me with the other problem? I wrote about RCI plop mod...thanks

[ruchaween 0]

so I can use boc with orion mod ? 

[darko26p 0]

Hi, first of all Good job, Very GOOD JOB. I read all 27 pages on this forum, and it's interesting how mod evolved. But I have a little problem.. I download latest mod 98p and he dont work for me. Bat file wont install at all (picture 1). So I did install it manually, still dont work. Yes I can put some objects on map outside border. But cannot upgrade it, I'm holding upgrade item but cannot put it outside border (picture 2), and some debug menu missing icons ((like in some previous versions), picture 3)). And now I have some roads that cannot delete (picture 4).

So my question:  I have downloaded some offline game version (nosTeam), and have Razor version - Which one i need to use your mod to make it work? And If I can play with this one how to fix mod and roads. I will help as much I can, just tell me how. Thanks

[ruchaween 0]

darko . if the bat file don't work , u can copy all file to SimCity folder and it will  done .

 

i know some mod that not work for  boc  . 

 

it called  project alkar  ui  enhand  , i hope u are not install it .

[Blue Keiko 39]

You CAN use Akar together with BOC. On the Options screen's top right corner, you'll see "EXPOSE DEBUG UI". Pressing that makes BOC's onscreen icons appear which you can use.

 

If you have Udon, and ploppable RCI installed, I would highly recommend installing Akar as well.

[darko26p 0]

darko . if the bat file don't work , u can copy all file to SimCity folder and it will  done .

 

i know some mod that not work for  boc  . 

 

it called  project alkar  ui  enhand  , i hope u are not install it .

Thanks for reply . I know, I did mention that BOC is manually installed. Don't have any other mods either on simcity. Reading Akar mod see that cannot work.

Akar and BoC are two different interface. You can't have both mods to work, so users may have to choose only one.

[darko26p 0]

You CAN use Akar together with BOC. On the Options screen's top right corner, you'll see "EXPOSE DEBUG UI". Pressing that makes BOC's onscreen icons appear which you can use.

 

If you have Udon, and ploppable RCI installed, I would highly recommend installing Akar as well.

My expose "debug ui" works, just have some problem with icons.. Some are there, some ones not (You can see in pictures how it looks). I dont have any other mods at all. Problem is something else. I cannot install Akar and BOC together,, This is what I found on Project Akar page:

Akar and UDoN-Addon are two different interface. You can't have both mods to work, so users may have to choose only one.

[Yayie 311]

 

darko . if the bat file don't work , u can copy all file to SimCity folder and it will  done .

 

i know some mod that not work for  boc  . 

 

it called  project alkar  ui  enhand  , i hope u are not install it .

Thanks for reply . I know, I did mention that BOC is manually installed. Don't have any other mods either on simcity. Reading Akar mod see that cannot work.

Akar and BoC are two different interface. You can't have both mods to work, so users may have to choose only one.

 

 

apparently you can work BoC with Akar with BoC debug menu. only that Akar and BoC itself both have different UI.

[darko26p 0]

 

 

darko . if the bat file don't work , u can copy all file to SimCity folder and it will  done .

 

i know some mod that not work for  boc  . 

 

it called  project alkar  ui  enhand  , i hope u are not install it .

Thanks for reply . I know, I did mention that BOC is manually installed. Don't have any other mods either on simcity. Reading Akar mod see that cannot work.

Akar and BoC are two different interface. You can't have both mods to work, so users may have to choose only one.

 

 

apparently you can work BoC with Akar with BoC debug menu. only that Akar and BoC itself both have different UI.

 

So I can install first Akar then BOC? Boc will rewrite debug menu from Akar, right?

[ruchaween 0]

thank you all . I can use boc with akar ui  now .

[Blue Keiko 39]

@ProcsKalone:

 

Hi,

 

I have a question.

 

After you have plopped a certain amount of (different) ploppables, the next ploppable building kind of sort of "bakes" itself in the region, making it un-selectable no matter how you move your mouse over it.

 

Is there a way around it, or can't the game have anymore? Thanks a lot.