kazerak2

If this is in the wrong forum, by all means do move. Below is an image of my town I am using a 6C RHW here, however, you may notice that I have an issue here. I am not finding a 6C bridge starter piece, only for a four lane RHW. Obviously it is quite clear what I am trying to achieve in this photo, to get my 6C RHW from point "A" across the valley and over the avenue to point "B". Is that possible? Or is my highway too advanced for itself? Thanks guys.

^To what 78911 said, I agree I have played this game on and off since 2003. I used to just want to see tall in game buildings. However, now I am very particular how I want my city to look. I really don't play the simulator, I'm more into super detail more realistic towns. So I plop a lot. Riverview downtown area...

I'm an MD at Cox Health In Springfield, MO. My specialty is Anesthesiology.

This is my most recent one, something I made on Apophysis 2.02 program. The picture is from a 21" monitor, so the resize makes it a little harder to see.

even though you put the cheat in the game still acts like it has no power unless you have a power plant. That cheat just makes it so that building can be built with no power and removes the zots. If you notice in your ticker your utility guy is pissed because of no power. If you haven't already just place a power plant somewhere and run a grid through the city. It will act like you never put it in, however, if there is a blackout you can't tell unless you look at the map. I don't think it can be reversed, have you tried putting in fightthepower again that may turn it off, not sure though.

even though you put the cheat in the game still acts like it has no power unless you have a power plant. That cheat just makes it so that building can be built with no power and removes the zots. If you notice in your ticker your utility guy is pissed because of no power. If you haven't already just place a power plant somewhere and run a grid through the city. It will act like you never put it in, however, if there is a blackout you can't tell unless you look at the map. I don't think it can be reversed, have you tried putting in fightthepower again that may turn it off, not sure though.

Well theoretically the game wants you to make it balanced, I+C=R So if you have a city with a population of 300,000 then you should have a commercial population of around 150,000 & also around 150,000 population for the industrial as well. However that is often times harder said than done. What I do is try to stay as close to that rule I just said above & also going by what my RCI bars tell me.

Are there any buildings on the STEX that are made to be used for underbridge use? I just need a small building, an old looking warehouse would be ideal. Just a building that will overhang enough to cover the underside of the bridge. Nothing to flashy though. The bridge is the Brooklyn Style bridge to get an idea of what I need. Thanks for any help! I'm not sure why it has a link going to a Google Search of particuallry?

Originally posted by: tungston Originally posted by: SimRabbit I don't know if there is one (there should be) Making a oberhanging buildings is pretty easy, you just have to convert a building into prop and place it outside of a lot's limits.quote> I have some sad news. You can't just place a prop outside of a lot, the Lot Editor will not allow it. You have to make an offset model with the BAT. I have tried to get Pegasus to make some of his CDK lots to do that, but so far, no luck. quote> So you can't make an overhanging building in Lot Editor?

Here on the Stex I have seen two other kinds of Elevated rail styles unlike that of the one in the game. I can't find the pictures of the two right now, however, I will try to find it later to show an example. I saw the two types of track on the stex, the train that you would download was on those different Rail types. If anyone knows what I'm talking about it would be great if you could shed some light on this for me. I have been trying to look for those rails for a while now and I have come up empty handed. Thanks!

Hey thanks, thats what I was looking for!

Ok, I got the June 07' NAM nonsense, a lot of cool stuff. However I have two problems, first of which is the roundabouts. In the road section I see a picture a a roundabout and if I hover over it, it says to press "tab" to cycle through the different roundabouts etc... and how the arrow will turn from red to green once it's positioned right. When I click it nothing happens, I see no roundabouts and the arrow never turns green. I made sure that when I installed it that it had the roundabout option, and it does. I still get nothing. Second Issue, in my misc. transportation all the new draggable GLR shows no pictures, I can still select it. I just wanted to see if anyone here could help me out with this. Thanks!

Thanks for all the help, ssc4k's response was what fixed it.

Ok, I downloaded the squarmish British Columbia by beskhu3epnm I opened the game went to the region and let the game render it. After it was rendered my map barley resembled the one I saw in the picture, the main issue was that the mountains peaks were not high at all, just some snow capped hills. There was also more water on the map than from the map image I saw on the Stex. I kinda new to he map stuff, I just want a really mountainous region. What missing here or what am I doing wrong. Thanks.

Originally posted by: Gridlock Awesome downtowns , here s a regional pic of my largest sky scraper district . quote> Good Lord! 40 million! how much time have you put in to that region? the largest one I have is the one that I posted above & that region only has 2.6 million I thought that was a lot.

These next three images are pictures taken of downtown Springfield. This next picture shows the North Eastern part of downtown Springfield known as the Seville Square.

This first one is the a picture of Jackson Ave (Hwy 632 E) crossing over Columbus Bridge into the western part of downtown Springfield, while overpassing Water St. This next one is a picture of the BNSF rail line running through Springfield as it exits the North Western part of downtown, once again crossing over Water St.

This is a more close up shot of my ballpark located downtown. Here is one zoomed out a bit more with another sports arena in the shot.

Thank you for all the comments. Filasimo, I like your airport it kinda reminds me of the Kong Kong airport. After looking at the pictures I posted I realized that those aren't the current ones. I have since changed some things around on it. - I sunk the highway. - Made the bridges appear more realistic. -Changed the layout of the hotels in front. -I was also able to get my metro-link train to the island.

This airport is from my Anchor region, the region is a chain of large islands. Once the main islands were over run with people & no room for an airport I decided to make an island for it. Took me a while to make it the way I wanted it but I'm happy with it. It's call Anchor Pacific International Airport.

I hope this is inthe right forum, as well as I hope this hasn't already been requested.....If so then please ignore this. I would love to see the Wainwright Building on the stex. Many of you probably know about it but for those who don't the building is located in St. Louis, MO. It was one of the first modern skycrapers built with an all steel frame built back in 1891. The building has great detail & would be a great addition to the Stex. Here are some pictures. Images were too large. ~ VT