Elevated networks appear without pillars

[io_bg 249]

Hi guys, I've got that problem - when I build elevated highways and el rails they appear in the air without any pillars. I don't know what caused this so I hope you'll help me. Is this because of the NAM? Should I reinstall it? If you need a picture, I'll post one.

[JakeMD 107]

Yeah, go ahead and post a picture, that would definitely help.

I can already tell this is a NAM issue, you are missing some part of each network model.

[io_bg 249]

Okay, here is a picture -

Only the monorail has pillars because I'm using a patch which adds catenaries and changes the pillars.

[Haljackey 17,241]

...And what patch is this?  This "patch" may very well be causing the problem you are having.  I would remove it and see what happens.

If you're looking for a mod that will properly change the monorail, I would highly suggest using the High Speed Rail (HSR) mod or the bullet train mod (BTM) as these are both NAM-compatible.

Hopes this helps lo_bg!

Best,

-Haljackey

[io_bg 249]

I've installed that patch a few months ago and this problem has appeared yesterday so I'm sure that it isn't causing this. I also have the HSR and it's working properly (rail lines have pillars).

[warrior 169]

Did you install anything yesterday, I'd still as HalJackey suggested remove the "patch"(btw what is the patch and where did you get it?

Jonathan

[io_bg 249]

The patch is called ''HSRP Shinkansen patch''. I also reinstalled the NAM but there were no changes.