Show us your Bridges

[antsel 841]

Nice set of bridges NTM. I wouldn't mind seeing how that looks in your region view.

[Cleaner475 150]

Here's some more of mine from a unreleased CJ, just basic colour effects on the pictures.

Regards,

Richard

[Simcitymaster13 27]

That reminds me of the good old days of SC 3000.

[nathanthemayor 1,263]

Nice bridges there!

[Jazzmaster 716]

Nice work Cleaner, though I might recommend using seawalls around the water to compliment the urbanity of the area (seawalls should have park/landmark effects).

[tonyr 926]

I really like the region shot, nice work!

[nathanthemayor 1,263]

This is a causeway, but I guess it counts

Full resolution

[nathanthemayor 1,263]

Two new ones from Paridise Island

[heitomat 156]

From my latest CJ update: A bridge crossing the bay in Hafenstadt Weneer:

[kakado_to_save 514]

The "Gesher" bridge.

Rout 89V

across the Dorimcha River.

[antsel 841]

@Heitomat very nice gritty, industrial scene. That bridge works perfect for it.

@Kakado that's a really nice bridge. Good work with the ploppable water too. The shoreline looks great!

[Jazzmaster 716]

Some great work here!

[heitomat 156]

Thank you, Selles.

I love your bridge, Kakado! Great work! And Yoshi: That's a really nice picture! I love the Japan river, the pipe, the waterfall.. Great!

[zahrul3 472]

@kakado: Where did you got that ploppable water one-way road bridge?

[nathanthemayor 1,263]

A bridge in Paridise Island

[Slashback 136]

@ nathanthemayor : It's not really nescessary to post the same picture in two "Show us your..." posts. If we all did that, the posts would be full of something we'd seen before.

[jacqulina 162]

excellent bridges everyone great detail too.

[MN121MN 11]

Uhmm, I'm new to these scene, so i have a few questions....

How do you make a bridge go across land like some of the photos?

How do you install a bridge? I've downloaded one but it never appeared anywhere....

Must a bridge have the same height on both ends, or can you make one of those ends lower/higher than the other?

Sorry to bother this thread, once again, I'm new to this....

[Timmystwin 201]

Theres a rain tool to add water to areas so bridges can be made, as long as its in a crater.

Never installed a bridge...

The bridge is flat, but as long as theres enough land to build a slope up to it its fine

hope i helped

[nick96st 4]

deever nice cruise yacht(liner)................................the bridge on the second pic is just gorgeous! pls tell me where did u get 'em.

[Jazzmaster 716]

Uhmm, I'm new to these scene, so i have a few questions....

How do you make a bridge go across land like some of the photos?

How do you install a bridge? I've downloaded one but it never appeared anywhere....

Must a bridge have the same height on both ends, or can you make one of those ends lower/higher than the other?

Sorry to bother this thread, once again, I'm new to this....

1.) Look up the 'Rain Tool' by Teresu on the STEX

2.) The only custom, fully functional bridges are on the LEX on SC4D. There should be an installer included; you need to unzip and run the install, in a bridge directory under the Network Addon Mod (Abrev.: NAM). You need the NAM for these to show up. Make sure you have the updated NAM Bridge Controller installed as well. There is a length requirement for all bridges; some will appear at any length but others, e.g. the cable-stayed/suspension bridges, need to have I'd say roughly 200 tiles to show up in the selection and look good.

3.) Bridges must be the same height on both ends. If one end of the land where your bridge is being built is higher/lower than the other, the edged you dragged toward--not away from--will be leveled to that same height.

  Edited May 4, 2011 by Yoshiisland  

[pokeboy21 7]

wow! Those are beaitiful bbfan02.

[Alejandro24 575]

The highway of the bridge baces is the Teslavia Expressway, and the arch are the VMH-1 Highway.

[jacqulina 162]

Alejandro24 wonderfull scene

[nathanthemayor 1,263]

A new bridge I made:

[jacqulina 162]

great bridge there

[nathanthemayor 1,263]

Two new bridges, from the small town of Verona(Yes, named after the Romeo and Juliet setting).

[jacqulina 162]

great work there very nice bridge scenes

[nathanthemayor 1,263]

The new western span of the Trans-River Bridge:

Full resolution

[jacqulina 162]

great shot there