BSC Prop Family Index

[BarbyW 40]

To give variety to how props appear on a lot, you can put the props into a family. To make buildings or props appear in a family, you need to use an IID in the Building/Prop Family property of the Building Exemplar.

Since this discovery by ralphaelninja and subsequent work by GrampaAl there has been an Index kept of the IIDs allocated to various people. The thread where requests are made has been getting buried so I am posting here a list of all the IIDs allocated to date and will ask for this to be pinned so that requests for IIDs can be made here.

Range From	To	Allocated to
00000A80	00000AA0	ArkenbergeJoe
0a000502	0a000520	EQ
30000000	3000ffff	ArkenbergeJoe
51500000	515000ff	Jestarr
51600000	516000ff	RP
51700000	517000ff	JMyers
51800000	518000ff	spa
5a100000	5a1fffff	Sam
5a500000	5a5fffff	ShadowAssassin
5e400000	5e4fffff	Sepsis
5f100000	5f111fff	Marcosmx
5f120000	5f12ffff	nofunk
5f130000	5f13ffff	Alien_397
5f140000	5f14ffff	Mjg_dudy
5f150000	5f15ffff	HongKong
5f160000	5f16ffff	Dk1
5f170000	5f17ffff	Krio/Bengt
61000000	610000FF	geoffhaw
64599780	6459FFFF	Twrecks
84840000	8484FFFF	vil
A0000300	A00003FF	jeronji
A0000400	A00004FF	rebalynts
A0001401	A0001fff	Pegasus
A0005500	A000055ff	sandrasim
A0008100	A0000839	BLSGA

[DuskTrooper 314]

Thank you for posting this!

I'd like to go one step further, and request an instance group, for my own personal use (so I don't run into conflicts, or anything, when modding stuff for my own personal use, and such). Thanks again!

EDIT:  Thanks! (in reference to the post below)

[BarbyW 40]

DT, I will allocate 0xDC000000 to 0xDC00FFFF to you.

[Andreas Roth 607]

Ah, I didn't know that a prop family index existed, so it's good to see it back. For the SFBT stuff, I'm using the 0xFF5Fxxxx range (that also includes custom UIs etc., I'll keep my own list where I subdivided the range to my personal preferences, so you don't have to worry about that).

EDIT: Pinned and added my own range.

[T Wrecks 10,209]

6459978 has used the ID 0x64599780 for his Stephen Drive, and I used 0x64599781 - 0x64599785 for the associated mega-lots.

[BarbyW 40]

Thanks for pinning this, Andreas. I tried to find the thread where this was and failed so thought it was time it was posted separately. I have edited the above and also my spreadsheet with the SFBT and 6459978 IIDs.

[mjig_dudy 11]

say if i wanted to make something for my own personal use, could i use the ones to allocated to DT as he was only going to use them for personal stuff. I'm just checking if i would not run into confilcts if i did this?

If this is the case might it be better to alcocate that range for everyone but strickly for personal use only?

[BarbyW 40]

I would rather not as if any of them did escape into the community it could cause a lots of problems. People do not always read something like - for the community but PERSONAL use only. If you want a set to make some prop families yourseld ask again and I will allocate some IIDs

[Constantina 5]

This is going to be useful. Thank you.

[ArkenbergeJoe 35]

Hi BarbyW

Thanks for the Range 30000000 - 3000ffff 

Allerding lese ich, dass die  ID  00000A80; 00000A90; und 00000AA0 noch nicht vergeben sind.

Diese habe ich mal früher für die SFBT-Mega-Lots verwendet, somit bitte ich, diese 3 Instancen-ID's für mich zu vermerken, damit es nicht mal zu Konflikten mit anderen Prop-familys kommt.

Diese Range verwende ich auch nicht mehr weiter, sondern jene, die mir zugeteilt wurde.

Thanks

EDIT: Sorry, dass ich alles in Deutsch poste, aber in Englisch würde es nur eine kleine Katastrophe geben ;-)

[BarbyW 40]

Andreas, HELP.

[Andreas Roth 607]

@BarbyW:

Translation:

Thanks for the Range 30000000 - 3000ffff

Looking through the list, it seems that the IDs 00000A80; 00000A90 and 00000AA0 are not assigned yet.

I have used those for the very first SFBT Mega Lots, therefore I request to reserve these three IDs for me as well to avoid further conflicts. I don't intend to use any other IDs from that range, though, but only the new range that was assigned to me.

Thanks

EDIT: Sorry that I post in German, but using an automated translator would only mess up everything. quote>

[BarbyW 40]

Thank you. French I can cope with but German is completely lost on me. I shall edit the list above to note those IIDs.

[ArkenbergeJoe 35]

Thanks BarbyW and Thanks Andreas

[vil 3]

84840000 to 8484FFFF bitte, if thats not being too greedy...

[BarbyW 40]

Done,vil.

[spa 968]

Barby, sometime over the next few months I'm going to be releasing at least one set of rowhouses. I will hopefully be able to figure out the modding and get them released as a prop family so that which one appears will be random. If I'm successful I plan on doing a few more rowhouses afterwards in the same way. So I was hoping to be allocated a prop family range. Thanks.

[BarbyW 40]

spa: I have allocated 0x51800000 to 0x518000ff to you.

[spa 968]

Thanks a lot Barby. I'm still new at this aspect of batting and modding so I hope you don't mind me asking this noobish question but what is ff? What is the range of 00-ff?

[Andreas Roth 607]

Well, that's 0x51800000, 0x51800001, 0x51800002, 0x51800003 etc. up to 0x518000ff - or in other words 256 (ff is hexadezimal for 255, and since 00 is included, that makes 256) different building/prop family IDs - should be enough for the first batch of lots.

[BarbyW 40]

Thanks, Andreas. It should be enough to start.

[spa 968]

Thanks for the clarification. I just didn't know what ff stood for! 256 should be way more than enough. It's unlikey that I'll add 256 rowhouse sets to the STEX!

[tag_one 133]

can I have 0xEFFEC000 to 0xEFFECFFF please? (It feels like I'm shopping)

[BarbyW 40]

Sorry, tag_one, I missed your post. I have allocated those IIDs to you.

[david1314 44]

Could I get a range, please Barby? Working on new props now.

Edit:

er how about just

Edited again...see Barby's post below.

[BarbyW 40]

David1314: I have allocated 0xFA100000 to 0xFA1FFFFF to you as the ones you requested are allocated to pmiller1974.

[david1314 44]

Thanks Barby,

I did not (and still don't) see pmiller's on the list above. Perhaps these should be added.

[BarbyW 40]

JBM is pmiller

[Cuthalion 0]

Might I be so bold as to request a range? Thanks in advance.

[BarbyW 40]

I have allocated 0x A007C000 to 0xA007CFFF to you, Culathion.