NAM 45 problem

[saubr 7]

problem

the cross of the rail with street and intersection made boxes..

[Ulisse Wolf 4,453]

I just checked this report and did not find that the Street (SAM) X Rail intersection has this problem. I recommend that you perform a clean installation of NAM 45.

[saubr 7]

i need just to delete the folder network addon mod in plugin folder?

and install again NAM45?

thanks

@ulisse

[saubr 7]

ok, was been another plugin that made conflict. i found it and remove it. now work fine for now..

i have just a problem with traffic, a lot of traffic also in highway, not the realhighway, railway, monorail.

and also the leveling of the earth, when i put the highrailway that made a hole and is impossible for made a way, because i need to put a section by section, isnt like the normal railway that you can made the all way together.. any plug for fix this problem?

thanks

@ulisse

 

[Ulisse Wolf 4,453]

I think you have the sinkhole problem. You can solve it by leveling the affected area again

[saubr 7]

i will try.. but with the normal level i think is impossible.. i hope to found some plugin..

and for fix the problem of traffic? any advice? the my cities are of 200.000 until 370.000 abitants

3.000.000 in the region around, maybe 2.500.000 i not remember..

[saubr 7]

i removed the nam45 folder, the plugin that made conflict and reinstalled again the nam45 and after that the problem was been solved.

now i have this problem with the leveler and traffic..

[saubr 7]

this is a my city of 370.000

a lot of problem of traffic

[z1 566]

I notice that you're running the Classic capacity simulator.  I would strongly recommend upgrading to Low.

As an alternative, you could build up your subway network.

Your usage and congestion are not at all unusual for your population level using the Classic simulator.  I was able to create a city with 4.129 million Sims with this simulator.  It worked fine, but everything was congested, even with a huge subway network.

[saubr 7]

what is the low simulator?

i have the subway already.

i dont have parking, i will put parking..

[saubr 7]

any advice for some plugin for a good bus stop but in the street, i dont want lose space for bus stop

[saubr 7]

another error..

look here

 

[saubr 7]

is possible because dont found dependeces?

look photos

 

[z1 566]

On 10/5/2022 at 1:10 PM, saubr said:

and for fix the problem of traffic? any advice? the my cities are of 200.000 until 370.000 abitants

3.000.000 in the region around, maybe 2.500.000 i not remember..

Some traffic congestion with the Low traffic simulator at these population levels is normal, and should not cause a problem.  If you think there is too much congestion for your taste, try a higher capacity simulator.  You have to reinstall the NAM to do this.

 

On 10/6/2022 at 3:24 AM, saubr said:

what is the low simulator?

When you install the NAM, you are given the choice of different capacity simulators.  In order of increasing capacity, these are Classic, Low, Medium, High, and Ultra.  The Low capacity simulator is recommended for most people.

 

On 10/6/2022 at 3:24 AM, saubr said:

i dont have parking, i will put parking..

Generally, cities don't need additional parking, as there is implied parking at all commercial and industrial buildings.  Adding parking to a city will generally have no effect in the way that the city runs.

On 10/6/2022 at 3:25 AM, saubr said:

any advice for some plugin for a good bus stop but in the street, i dont want lose space for bus stop

RTMT is by far the most comprehensive solution here.  You will need the base pack ROAD TOP MASS TRANSIT as well as the add-on pack RTMT Add-On Pack V3.60 .  RTMT v4.0 should be coming out in the next few months; this contains a lot more stations, and it is considerably easier to install.

[saubr 7]

I think NAM45 doenst work with the my version of sc4

i removed all plugin, reinstalled NAM45 but datanode show this problem and i cant put realhighway and highspeedrail more tiles together, 1 tile for time, when i made intersection from 2 way to 3 way with the starter piece made hole in the intersection.

the list in datanode of overrides file are all of NAM45, i dont have plugin installed.

 

 

 

 

 

 

 

@ulisse

[z1 566]

4 hours ago, saubr said:

I think NAM45 doenst work with the my version of sc4

Your version of SC4 is the latest and should be completely compatible with the NAM.  Why you're having these problems is a mystery, but rest assured that the NAM Team is looking into this.

[saubr 7]

i need to made a claim? @ulisse

[Ulisse Wolf 4,453]

2 hours ago, saubr said:

i need to made a claim? @ulisse

Do it this way. Watch this video tutorial on how RHW works.

I think you are not understanding how NAM works as we are not experiencing any problems with NAM. Watch these tutorials and test with a clean plugin folder without any other mods except a clean installation of NAM

[saubr 7]

i claim i mean for the error in datanode, for them for know some bug...

i will check later with the tutorial and let you know

[Ulisse Wolf 4,453]

1 hour ago, saubr said:

i claim i mean for the error in datanode, for them for know some bug...

i will check later with the tutorial and let you know

Since you have installed the EU Texture version the datanode is indicating that there is a texture override and it is not a bug

[saubr 7]

but the plugin folder is empty... how is possible? how i can fix it?

[Tarkus 6,933]

23 hours ago, saubr said:

That's not a bug.  The starter is supposed to do that.  All starters and FLEX Pieces have a "vanishing construction tile" that allows them to be plopped, and it'll erase whatever is on the same tile that the construction tile is placed.  Simply drag the RHW tool through the gap, and it should work fine.

On 10/6/2022 at 8:02 AM, saubr said:

is possible because dont found dependeces?

look photos

The NAM has no dependencies, and that "Setup" tab is mostly useless (including the Cleanup part).  I'd ignore it and do nothing with it.

Looking over your reports, I don't actually see anything here that is actually a bug or problem with the mod (though I would perhaps second switching from Classic to Low on the simulator capacity level, as @z1 mentioned). 

We did an extensive DataNode review of the mod after NAM 44's release, and actually put all development of new features on hold for 2-3 months, to resolve just about everything DataNode found.  We even redid the file architecture of the textures to minimize those "override" situations (which aren't necessarily an issue, but undesirable if there's too many of them).  That Rail tunnel thing was not addressed, because it's actually a DataNode issue, not a NAM issue, as DataNode assumes that tunnel model references in Network Parameter Tuning exemplars must be Resource Key Type 1, when in fact, Resource Key Type 0 (what the RRW uses there) is in fact valid.

-Tarkus

[saubr 7]

ok understand and work fine, the problem is just why i can put only 1 tile for time and not together like the highway, for made a line in 1 time ( ex. 10 tiles together)

thanks

 

[saubr 7]

is installed already  a simulation low capacity.

 

medium i think could be not realistic.. 

i will try to put also the realhighway, high speed rail, tram and check if work better, if not i will move to medium simulation.