Tell me what tool can be used to connect these puzzles on the highway?

[DreamMachineMan 8]

tell me what tool can be used to connect these puzzles on the highway?
 

the tools with which I continue other avenues and highways do not work here. Why??? what am I doing wrong??

[DreamMachineMan 8]

I wanted to ask if it is possible to connect these two highways?
 

[simmering 2,720]

The Real Highway network comes in two types, separable and combined. The separable highways have a yellow line on the side to tell you where the middle is. You draw each side separately. Combine highways have a double yellow line in the middle . Your images indicate that you are trying to connect a combined highway to one side of a separable one. That would not work. Have a look at the documentation:  https://www.sc4nam.com/docs/feature-guides/realhighway-mod/#realhighway-network-widths

[DreamMachineMan 8]

57 minutes ago, simmering said:

The Real Highway network comes in two types, separable and combined. The separable highways have a yellow line on the side to tell you where the middle is. You draw each side separately. Combine highways have a double yellow line in the middle . Your images indicate that you are trying to connect a combined highway to one side of a separable one. That would not work. Have a look at the documentation:  https://www.sc4nam.com/docs/feature-guides/realhighway-mod/#realhighway-network-widths

I built a bridge and for some reason it also only has one part of this highway, how do I connect this puzzle to the bridge?
 

[DreamMachineMan 8]

1 hour ago, simmering said:

The Real Highway network comes in two types, separable and combined. The separable highways have a yellow line on the side to tell you where the middle is. You draw each side separately. Combine highways have a double yellow line in the middle . Your images indicate that you are trying to connect a combined highway to one side of a separable one. That would not work. Have a look at the documentation:  https://www.sc4nam.com/docs/feature-guides/realhighway-mod/#realhighway-network-widths

which tool can be used to extend the highway?

[Kel9509 1,476]

@DreamMachineMan, you need to play around more with the RealHighways and bridges if you want to connect them. In general, you can only connect a RHW bridge to the same type of network.  So if you have a RHW-10S bridge, you can only connect that to a RHW-10S network, at least initially.  To connect the bridge to the network, draw a RealHighway from the network to the bridge's extension and it should connect if you overlap the draw to the bridge's extensions.

I suggest watching this video and playing around with the RealHighway yourself:

Here's another good basic tutorial:

 

 

[DreamMachineMan 8]

6 hours ago, Kel9509 said:

@DreamMachineMan, you need to play around more with the RealHighways and bridges if you want to connect them. In general, you can only connect a RHW bridge to the same type of network.  So if you have a RHW-10S bridge, you can only connect that to a RHW-10S network, at least initially.  To connect the bridge to the network, draw a RealHighway from the network to the bridge's extension and it should connect if you overlap the draw to the bridge's extensions.

I suggest watching this video and playing around with the RealHighway yourself:

Here's another good basic tutorial:

 

 

Thanks ))

[DreamMachineMan 8]

On 23.01.2026 at 11:12 PM, Kel9509 said:

@DreamMachineMan, you need to play around more with the RealHighways and bridges if you want to connect them. In general, you can only connect a RHW bridge to the same type of network.  So if you have a RHW-10S bridge, you can only connect that to a RHW-10S network, at least initially.  To connect the bridge to the network, draw a RealHighway from the network to the bridge's extension and it should connect if you overlap the draw to the bridge's extensions.

I suggest watching this video and playing around with the RealHighway yourself:

Here's another good basic tutorial:

 

 

tell me what is the problem again?? I took the appropriate element, did everything as in the video, left one puzzle of the highway and wanted to connect it, but it does not work. Why???

[Kel9509 1,476]

On 1/25/2026 at 9:50 AM, DreamMachineMan said:

tell me what is the problem again?? I took the appropriate element, did everything as in the video, left one puzzle of the highway and wanted to connect it, but it does not work. Why???

Looks like you're dragging it onto the bridge, so that won't work.  Only drag to the last element of the Maxis highway stub, and make sure there's only one stub remaining as any more might make it not work.  Make sure that your 10S starter piece is well away from the bridge and you're only dragging the RealHighway over to the stub, and through the starter piece.

(note, I use the MaxisHighway Override so my stub looks different than yours, but I only have one stub and am only dragging the RHW through the starter piece to that stub piece.)

[Kel9509 1,476]

To make it very simple, here is a series of step-by-step images that show EXACTLY what I did.

1. First I drew the highway with the Maxis Ground highway tool and selected the first 10S option that appears.  You'll notice I have a large stub of Maxis Highwy after the 10S bridge:

2. I bulldoze all but the last stub of Maxis Highway:

3. Now you can see that there's only 1 stub of Maxis Highway left.  Notice how it's not going to the end of the square?  That means it was properly bulldozed and not erased with the Network Eraser.  You want it like that because to overlay the Maxis Highway properly, it can't be filling the entire square:

4. Now I place the 10S starter piece a bit away from the bridge: 

5. Then I drag the first half of the RealHighway through the starter piece to the Maxis stub piece:

6. The first half is now connected properly to the bridge, and the Maxis stub that I drew over has now been adapted to look like the RealHighway:

7. Now I drag the other half of the RealHighway through the starter piece to the other Maxis Highway Stub: 

8. And now it's complete.

Also, be sure you're connecting GROUND HIGHWAY to GROUND HIGHWAY, and ELEVATED HIGHWAY to ELEVATED HIGHWAY.  Try doing it with Ground highway only first.  I think in your picture you're connecting a Ground RHW 10S to an Elevated Highway.

[DreamMachineMan 8]

5 годин тому Kel9509 сказав:

Щоб зробити це дуже просто, ось серія покрокових зображень, які показують ТОЧНО те, що я зробив.

1. Спочатку я намалював шосе за допомогою інструменту шосе Maxis Ground і вибрав перший варіант 10S, який з'явився. Ви помітите, що у мене є велика заглушка Maxis Highwy після мосту 10S:

2. Я збиваю все, крім останньої заглушки шосе Максіс:

3. Тепер ви можете побачити, що залишилося лише 1 заглушка шосе Максіс. Помітили, що це не йде до кінця площі? Це означає, що він був належним чином збульдозерований, а не стертий за допомогою мережевого ластика. Ви хочете, щоб це було так, тому що, щоб правильно накласти шосе Максіс, воно не може заповнити всю площу:

4. Тепер я розміщую стартовий шматок 10S трохи подалі від мосту:

5. Потім я перетягую першу половину RealHighway через стартову частину до заглушки Maxis:

6. Перша половина тепер належним чином підключена до мосту, а заглушка Maxis, яку я намалював, тепер адаптована, щоб виглядати як RealHighway:

7. Тепер я перетягую другу половину RealHighway через стартову частину до іншої заглушки Maxis Highway:

8. І тепер це завершено.

Крім того, переконайтеся, що ви з'єднуєте GROUND HIGHWAY до GROUND HIGHWAY, а ПІДНЕСЕНЕ ШОСЕ з ПІДНЕСЕНИМ ШОСЕ. Спочатку спробуйте зробити це лише з наземним шосе. Я думаю, що на вашій фотографії ви з'єднуєте Ground RHW 10S з підвищеним шосе.

Thanks for the step by step instructions))

[DreamMachineMan 8]

8 hours ago, Kel9509 said:

Щоб зробити це дуже просто, ось серія покрокових зображень, які показують ТОЧНО те, що я зробив.

1. Спочатку я намалював шосе за допомогою інструменту шосе Maxis Ground і вибрав перший варіант 10S, який з'явився. Ви помітите, що у мене є велика заглушка Maxis Highwy після мосту 10S:

2. Я збиваю все, крім останньої заглушки шосе Максіс:

3. Тепер ви можете побачити, що залишилося лише 1 заглушка шосе Максіс. Помітили, що це не йде до кінця площі? Це означає, що він був належним чином збульдозерований, а не стертий за допомогою мережевого ластика. Ви хочете, щоб це було так, тому що, щоб правильно накласти шосе Максіс, воно не може заповнити всю площу:

4. Тепер я розміщую стартовий шматок 10S трохи подалі від мосту:

5. Потім я перетягую першу половину RealHighway через стартову частину до заглушки Maxis:

6. Перша половина тепер належним чином підключена до мосту, а заглушка Maxis, яку я намалював, тепер адаптована, щоб виглядати як RealHighway:

7. Тепер я перетягую другу половину RealHighway через стартову частину до іншої заглушки Maxis Highway:

8. І тепер це завершено.

Крім того, переконайтеся, що ви з'єднуєте GROUND HIGHWAY до GROUND HIGHWAY, а ПІДНЕСЕНЕ ШОСЕ з ПІДНЕСЕНИМ ШОСЕ. Спочатку спробуйте зробити це лише з наземним шосе. Я думаю, що на вашій фотографії ви з'єднуєте Ground RHW 10S з підвищеним шосе.

i tried and everything worked.
thank you))

 

[Lab Rat 16]

Automated Notice Message

All posts after 1 March, 2026 @ 01:37 GMT were lost in the site crash.

We've added this message thread divider in every topic across all forums for what were then active threads. (We decided active is if the most recent extant post (from the backup) was on or after 1 January, 2026.)

This divider serves as notice that the conversation was interrupted. Answers and further discussion which used to be here have been lost. Keep this in mind when replying. Our hope is to rebuild what is missing.