Station track not working

[Clus 24]

Hello all together.

I created a station track for the train network that is working perfectly as a local version. The uploaded version on the other hand does not work.

I am not able to create any train line with the finished train station. You can not connect the station to another one. Any suggestion or ideas what I might 

have done wrong ? I already looked in to other station tracks from the workshop and their properties/options (within the road editor) are the same as in mine. 

 

Thanks in advance

Clus

[Clus 24]

Some correction:

Only the elevated version isn`t working. The ground version works just fine. There is a "cheap" solution for that problem.... I could raise the ground version and

just delete the elevated one. The problem with that is, that it will be "tricky" to connect the tracks to the station. If you know how to do it, then it is no deal... In the

end it would be a bit inconvenient to create you network. The second problem would be the less versatility of the asset, when the differnt looking ground version wasn´t there ...

[R3V0 909]

What is the stop track lenght ? Also do you have advance stop enabler by Bloody Penguin ? 

[Clus 24]

It does not work at any length... I ve tested it from 12 to 21 tiles. And the mod was always active. The strange thing is that it worked as a local asset perfectly. I think I am going to do it only with the basic/ground - version and set the minimum hight to 9m above ground level. People have to figure it out how connect it to the elevated version.... It is possible, but sometimes a bit annoying and I am already seeing lots of comments about that on the assets page ...

[R3V0 909]

That's weird because @Emperor Li reported something similar with elevated train station tracks. I believe it was also working for him in local then stopped working for some reason

[Emperor Li 21]

Well, they actually work. My problem was with ASS. It's sometime tricky to place stops since you have to move cursor to the proper place while pressing "shift".

But whether it will still work after uploading I don't know.