A chalange for you

[afagundes 70]

Hey guys,

 

I am doing some modifications to RRP Draggable Paths ChrisAdamas3997 so the ALN_0220_Dirt Path.dat and ALN_0226_Cement Path.dat show up in the PROP list in LE.

Here is what I have done so far:

1. Changed the "Exemplar Type" parameter from FLORA to PROP for the ALN_0220_Dirt Path.dat (Now it is showing up in the PROP list in LE).

2. Repeated the step 1 for the ALN_0226_Cement Path.dat (It did not show up in the PROP list in LE).

3. Reviewed each parameters for the ALN_0226_Cement Path.dat and they all look the same as the ALN_0220_Dirt Path.dat parameters.

4. Made a copy of ALN_0220_Dirt Path.dat and deleted all files contained in the dat. Used this empty dat to create a new dat for ALN_0226_Cement Path.dat - all parameters from the original ALN_0226_Cement Path.dat were copied into the new dat (Now it is showing up in the PROP list in LE).

My conclusion is that I am not able to edit something with iLive Reader. Why doing the step 4 seems to resolve my issue?

[rsc204 21,862]

There is an easier way usually to turn flora into a prop. Just load PIM with the models located in the root of your plugins folder. You can then drag the models from the right side into the "prop" category on the left. Repeat for all the models and you'll have a set of regular props.

Bear in mind Flora has some specific and unique properties that are not used generally for props. Forgetting to remove/edit such properties might cause them to fail to work as intended.