Official Mapping Community Requests

[1ajs 49]

could some one make a map of winnipeg plzz if you could put in the floodway also plzz

google maps zooms right to winnipeg if it maters

txs

[abcd 5]

What about the Edmonton Metro Area and the Calgary Metro Area?

[C-Dog 0]

I would like to request a scaled map of Essex County, Ontario .  The area would include Windsor (NW), Amherstburg (SW), Point Pelee (SE), and Tilbury (NE).  I have no preference to the city sizes.  I don't enjoy the small cities so if the image could have even city tiles  so I don't have to put small cities in (eg. 4 city tiles by 2 city tiles; not 3 city tiles by 3 city tiles).  Also, would it be possilble to get the map rotated slightly to get good alignment of the north-south and east-west roads.  Water, like Belle River , River Canard ( Duck River ), and Hillman Marsh would be a definite bonus.  I'll attach a map showing the approximate area.

 

I would like to use this area for my city journal. I'll be modelling the real world communites. Thanks for the help guys.  Your doing great work here.

[abcd 5]

Or what about the Omaha Metro area?

Or maybe Lincoln?

[chancellor062 0]

If you guys could make a map of Gotham City that would be great, heres a address to find an official Gotham City map

  http://www.geocities.com/dark_justice_batman/Gotham_1.html

 

if you could tighten up the gotham river though to make it a little narrower i would appreciate it and if it could be all medium citys also so it will run better on my computer that would be great to, thanx

[Praetorian Cohort 0]

Think you could make one of Valley of the Kings in Egypt for me? It would be appreciated.

[Century City 0]

Could someone make a map that has a big city in it, with either large population or large skyscrapers? It would be nice if the region was Tampa Bay. Try and fill the whole region with cool stuff and then post it as a map. I'm sure it'll be great. Thanks

 

[Goldfish4209 9]

My request: a map with 2 large main cities in the middle, touching each other in an east-west fasion, with 2 rivers running through them and joining in the south. The river ends in the south, forming a Mississipi-style delta on the beach that runs along the southern edge of the map. The central strip, where the twin rivers flow, will be a completely flat floodplain, and toward the edges, mountains rise up, starting as small hills and ending in something like the Hymalayas. Thanks!

 

P.S. why am I describing this map so well? I know exactly what I want except that I have no time and I can't make a decent map with mountains if my life depended on it.

 

 

EDIT: Hellooo? Map squad? Anyone?!

[simonuts 0]

HI

do you think you could make a map of SPRINGFIELD from the simpsons

[screamomatic 14]

Can someone make a To-Scale mapp of Prince Edward Island? I tried to make one, but it just looks bad.

 

 

Edit:and maybe also some of the surroundings, like the bit of New Brunswick that is connected to PEI with the Confederation Bridge.

[DudeFromDenver 0]

I'd like to see a scale map of the Denver, Colorado metro area if possible.  The Denver maps I have seen before usually encompass too small of an area.

 

Coordinates would be Golden to the west, Longmont to the north, Watkins to the east and Castle Rock to the south.

 

I can make my own config with the Landscape Designer.

 

I would really appreciate it!

 

 

[christhebull 1]

How about Surrey, England. The map showing this county should also include London Heathrow and London Gatwick, even though they are just outside the county, I would like to see them included as well.

EDIT: Here's a map of the area.

https://www.simtropolis.com/idealbb/files//Surreyc.jpg align=baseline>

It would be best if the county was downloadable as 5 seperate areas, and as and entire county, as shown above.

Having large cities where real towns are and medium/small cities filling in the gaps would be best.

EDIT: Sorry if it's too big, I resized and re-uploaded the picture and nothing happened.

[Goldfish4209 9]

Why isn't there anyone answering the requests? This is the request board, right?

[screamomatic 14]

I'd also like to request a scale mapp of Malta.

[MrVegetable 2]

Date: 10/21/2005 3:22:45 PM Author: Goldfish4209 Why isn't there anyone answering the requests? This is the request board, right?

quote>

 

Dude be patient! We do have lives you know! I can't do anything cause I still haven't got a PC that can render regions...

[salehsamee 1]

Hello guys.

What i am requesting is not a real city but just as well...

I have attached a photoshop file of what i would like to have.
There are different layers to it and the layer names will tell you alot about what i would like

The two requirements are 1. the two red circled rivers at the edge of the 2 large cities must be like a looooonnnngg river on a whole side of the in order for me to make a great beach and river front, the river width in the large city should preferably be about 25-18 squares. And in the lower part i would like to a SEA. The white area are for hills or mountains, which ever suits you and the yellow region to left & right side is for you to surprise us

Thats just about it, ehehe, Thank you. BTW the config is 33x16.

Thank you. any questions, just e-mail me, I really think this map had great potential. I plan on making TWO cities in this region.



the photoshop file at
http://www.geocities.com/salehsamee/salehsamee.zip

[UCSBClassics53 0]

I was going to ask if one could use the San Diego County map on the STEX and add the rivers and lakes to the map.
thank you.
- dan

[Starmanw40 6]

I would like to know if someone could make a map of Allenstown, NH Or Concord, NH.

[AIX 270]

I would like to see a map of Anacortes, WA and the surrounding area.

The area would be the town of Anacortes, Fidalgo Island, the northern tip of Whidby Island, the Padilla Bay, Swinomish Channel, and the lowlands to the west.

[Abc987 3]

]If anyone wants to make Chenango County for me id love it and id send you a pic just pm me if you are interested

[danjel 0]

A map of the Darwin area would be good.

Here 's a google-map sattelite photo of the area, and it looks just fantastic.

[christhebull 1]

Date: 11/19/2005 7:22:28 PM Author: jrhnemo ]If anyone wants to make Chenango County for me id love it and id send you a pic just pm me if you are interested

quote>

Where is Chenango County? What towns are in it?

[CashMoneyMan 0]

Can anyone do a map of the region between Wenatchee and Chelan, WA?

[CashMoneyMan 0]

Just to be more specific about my request, i want a map of the area between Leavenworth, WA...Wenatchee, WA.....and Chelan, WA....this is an area at the eastern foothills of the Cascade Mountains....about 120 miles east of Seattle. This area includes Lake Wenatchee, Lake Chelan and Lake Entiat (Columbia River), but doing these might not be possible since they are all at different elevations (this is a moutainous region)..But if someone could do the best they can that would be great

[JonnyGreenwood 0]

Hi I have a request for a scale region map of the Atlanta Ga area if is possible.

-Thanks

[MojaveNC 0]

My request is for a scale map of the Westgard Pass area of eastern California:

http://www.terraserver-usa.com/image.aspx?T=2&S=15&Z=11&X=63&Y=644&W=3

If possible, maybe amplify the elevations a little bit pre-render so that they play a more realistic role in city planning than a straight conversion would... after all, you're talking about a 2000 foot elevation climb to the pass from the valley, and even higher for the surrounding mountains.

[torr4 0]

Could someone please make South East Queensland in Australia including the Gold Coast, Brisbane and Ipswich. I think it would be great with all the beaches and cannals. Ive tried this on my own but had no luck.

[XxTrillvillexX9 1]

How about a map of Houston?

 

 

[MojaveNC 0]

I know you guys are probably busy... just wanted to see if anyone reads this thread anymore and/or is working on requests..

[GREENIE123 0]

Could somebody make the Charleston, SC area, with the charleston downtown area looking like this: (Instead of what it looks like today)

width=400 align=baseline>