Elevated Rail Stations appear connected, but el train cannot pass

[PurpleCity 0]

My elevated rail stations appear connected (no broken tracks or stoppers), but when a AI driven el train tries to pass through "some" stations, it dissappears. I remember the AI trains used to be able to drive from one end of the track to the other.

So... I tried driving an el train in free drive mode and sure enough, I get to some stations and my train dissapears as if the track ended. I have blown away the station and rebuilt with the same problem.

I do use lots of mods, but in my test I used stock rails and stations.

[A Nonny Moose 8,261]

Well, for openers, UDI is a tack-on and may not be fully debugged. If you are using standard stations for the El, there is only one supplied by Maxis, so if some work, all should work. Try dragging the track though all of them.

[TekindusT 3,809]

Are you using a custom EL-rail station? Some less-experienced BATters just don't transit-enable these stations and trains never go "through" the station. Perhaps this is the problem.

You can check that if you have got installed the Extra Cheats Mod, typing drawpaths in the box will show you if the station has these paths internally laid (thus, it's transit-enabled). To hide these paths, just type hidepaths.

[Norfolk_Chris 6]

I am experiencing a problem with the new version of the Victorian el rail station by morifori, downloaded with NAM31.

No el rail traffic is carried to, or from the bridge end of the station thus rendering it functionally useless. This is a great pity as this was favourite el station!

Notes:

1. The automata shows trams passing through the station as if it was working normally.

2. The station has a subway interchange feature added that was not present on the original version of the station. This is not mentioned in the description.

3. The subway interchange works ok.

[A Nonny Moose 8,261]

Sounds like a V31 problem.  Check If it has not been reported, you should link your post there.  You can also step to the top of the list and review the other threads in the section where you might also find an answer to your question.