RVT Tunnell mod

[wmc78 1]

Hi

I have downloaded the RVT tunnel mod and have a good look at the read me file and I have a tried to achive the tunnels from part C 7.5m road tunnels and OWR but I cant get it to work. I have BRF tunnel and slope mod in and adjusted the tunnels heights from 13.8 to 7.5, I made a file called zzRVT tunnel mod and put the following files in there

RVT Avenue Tunnel - Concrete

RVT Ground Highway Tunnel - Concrete

RVT OneWayRoad Tunnel 7.5m - Concrete

RVT Rail Tunnel - DTR Entrance - Concrete

RVT Rail Tunnel - STR Entrance - Concrete

RVT Raised Highway Tunnel - Concrete

RVT Road Tunnel 7.5m - Concrete

Utils_RVT_STR_Tunnel_1b88eb8a.SC4Lot

Is this correct

I have tried taking the BRF tunnel and slope mod out and just used the extra Exemplar files but still i get the same problem..

Can anyone see the problem Any advice on how to fix this would be great.

Wayne

[wmc78 1]

Anyone got any ideas of fixing this??

[art128 4,618]

i'm actually interested by this problem too, as it happened to me. All the other tunnels work fine except the road one which came back to the standard maxis styled one.

If anyone has an answer, or know how to solve this problem..

[wmc78 1]

thanks for coming back to me , I have looked over and over at the read me file and still cannot see where im going wrong, even downloaded tunnel mod and slope mod again just in case and still cant get the road tunnels to work at 7.5m. Iam sure there is a simple thing that im missing or not doing....

[rivit 3,391]

tvrcars, and art128

I have had this problem too. I found that it is caused by the fact that there is a set of textures for the Road Tunnel in the Euro Textures Mod which overrides the my new tunnel texture, which I deliberately made in such a way as to not care about US or Euro.

To fix this the file RVT RoadTunnel 7,5m.dat must load after the Euro Road Texture file called zzz2_Euro_Textures.dat. which has the 0ad0xxxx textures in it. This eurofile is usually loaded right near the end of the sequence of files. A "find file"

took me a little whiel to find the first time and I forgot to put it onto the forum,

hope this helps

Ron

[wmc78 1]

Thank you so much It is working now, but the only way i can get it to work is by taking the zzz2_Euro_Textures.dat out altogether. I tried to rename RVT RoadTunnel 7,5m.dat

to zzz3_RVT RoadTunnel 7,5m.dat but that doesnt work, sorry to be a pain but how do I get RVT RoadTunnel 7,5m.dat to load after zzz2_Euro_Textures.dat. file.

Thanks again

Wayne

[rivit 3,391]

To make it load after the Euro File (now that you have renamed it which helps a lot) you must move the Tunnel file into the directory where the zzz2Euro file is. Then it should list in Explorer after the zzz2 file. SC4 will then also load zzz3... after zzz2

[wmc78 1]

Again thank you its all working now, the euro mod and your tunnels are now working together, I only could have done this with your help otherwise I would be still ripping my hair out.

Many thanks

Wayne