Elevated RHW to Ground RHW : Ramp connection

[e_ssen 0]

Hello,

Can someone help me or guide me on how to connect a Elevated RHW going in North - South direction to a Ground level RHW East - West which is intersecting the Elevated RHW.

I tried to add the Elevated RHW-4 Ramp piece but don't know how to take the Exit ramp and join with the East West RHW.

Thanks for your help

[heitomat 156]

There are several ways to connect the two.

Have a look at the RHW - Show us your pics. It's very inspiring and has a lot of great pictures, especially on the latest pages. You might discover a way to work around your problem.

Hope this helps.

[CaptCity 4,915]

If you're asking about the pieces to use, you can use the RHW4 Elevated Ramp connected to a Transition Ramp piece to get to ground level, and from there run the MIS to the other route. Something like this...

You can do this for the whole interchange...

This is only half and is very "quick and dirty," but I think it shows how to use the pieces. There are, of course, numerous ways to alter it to meet your needs.  You might check out this guide for more possibilities.

Hope it helps...

[e_ssen 0]

Originally posted by: heitomat

There are several ways to connect the two.

Have a look at the RHW - Show us your pics. It's very inspiring and has a lot of great pictures, especially on the latest pages. You might discover a way to work around your problem.

Hope this helps.quote>

Thanks for your response. I looked into those and most of the pic shows RHW with other Avenues and then RHW and not much of Elevated RHW.

I've attached a screen of how it looks. As you can see I'm using Elevated RHW Exit Ramp but not sure how to extend that for an exit to the other RHW. I was able to do RHW to Avenues/Road overpass  and then extend it but i'm specifically looking for Elevated RHW exit ramps and entrace ramps interchanges. Thanks.

[e_ssen 0]

Hey Captcity,

Thanks so much. Can you please let me know where these pieces you mentioned will be?

"to a Transition Ramp piece to get to ground level, and from there run the MIS to the other route"

Transition Ramp and run the MIS? Are these in Starter or Puzzle pieces? When you say MIS is that RHW or its something else. Thanks for your help. Appreciate it.

[CaptCity 4,915]

Originally posted by: e_ssen

Transition Ramp and run the MIS? Are these in Starter or Puzzle pieces?quote>

The Elevated to Ground Ramps are in the RHW Transition Piece menu (the 5th RHW icon down). They are at the end of the TAB ring, or first, if you Shift-TAB.

When you say MIS is that RHW or its something else.quote>

MIS is what I call the dragged portions of the single lane exit and entrance ramps.

And moving to Modding - Transit Networks

-CaptCity

[e_ssen 0]

Thanks CaptCity for the detailed explanation. Appreciate it.