This is the Reskin for the Hybrid Railway for the Network Addon Mod 39 (NAM 39) There is one texture set that can be used to make the Reskin but other textures for Ballast Sleepers and Rails can be used (This is encouraged). Instructions to Make Up this Mod Dependencies RVT's Program GoFSH is required to make this mod the current version of writing is (GoFSH 3.6.1) It can be found on the link below. GoFSH Editor You will need the current version of the Network Addon Mod for this mod to show up in game (NAM 39) Please read the points for installing this program on the link above.
Before starting - For the HRW Reskin mod you will need about 500MB of space that is freely available on the drive the mod is on. This mod will take about 3MB of space per varient. Future updates will mean a larger mod. This mod is not quite up to the scope of the RRW Reskin. It is designed to reskin the HRW only. Quotes donate that the text was taken from "RVT's" Readme so due credit is given. WARNING:
"The scope of this mod means the runtimes are sizeable - it will run fine while you do something else. However the script window stays topmost so move it away to left or right before starting (or if you're on Win10 use a separate desktop). Once the script window is open you can't move the GoFSH window underneath".(RVT 2019)
Good Luck - its worth the wait. You need GoFSH 3.6.1 or later to make this Reskin. To reskin the HRW Run the "(Make HRW 1- REDIT Rail SleeperBallast.txt)" file in GoFSH
 - select your Rail, Sleepers and Ballast - all rail changes
    
     Outputs are put into _Install, these are designed to go into Z___HRW Reskin. There will be Three outputs for the base L0 (All required) and Three optional Elevated Texture sets (Choose A B or C).
    
     1)HybridRailway_Textures_DTR
    
     2)HybridRailway_Lot_Support_DTR
    
     3)HybridRailway_Level_Crossings_DTR
    
     4)EL_HybridRailway_(A-B-C)_DTR (Note: Only one of these sets are required)
    
     A=Original structural Texture.
    
     B=JPN Moonlight Texture.
    
     C=Iron Girder and column Texture.
    
     (One of these will cover the 99% of the textures used in the Elevated HRW componetry)     '====  INSTRUCTIONS FOR THE INSTALLER BUILD ====================== if you are making multiple use-ready sets then archive the contents of the _Install folder for each variant between runs. "It is preferable these not be distributed via the fansite websites due to their size. If you are to be a distributor use Onedrive/Dropbox and advertise the link. Always supply the Rail, Ballast and Sleeper Textures used to make the variant to your end user, so they can make things themselves to match." (RVT) Many Thanks to (RVT) and (rsc204/MGB204) for there input into the reskin project. The key difference with the HRW mod as oppose to the RRW is that it uses a common C0 of Colour Alpha for most of the textures resulting in better customization of the textures. Creators of the HRW Mod.     RVT (GoFSH program developer)
    
    Eggman121 (Developer for the HRW Reskin)
    
Eggman (2021) Disclaimer While all efforts has been made to eliminate errors, some may still remain. No responsibility is taken for unintended consequences of this mod. Uninstall. To remove the compiled mod remove the following .dat files from your plugins      1)HybridRailway_Textures_DTR.dat
    
     2)HybridRailway_Lot_Support_DTR.dat
    
     3)HybridRailway_Level_Crossings_DTR.dat
    
     4)EL_HybridRailway_A_DTR.dat      5)EL_HybridRailway_B_DTR.dat      6)EL_HybridRailway_C_DTR.dat
     Eggman121