• Moose
  •  

    Please Note:  As explained here, due to limitations in the Gallery software, some Challenge submissions may include a larger version of the same image (e.g. for mosaics).
    Before voting, please check in the description and comments section to see if the author has posted one of these. However, it should not be a disadvantage if an author just has the required Gallery image.

Orthodox Fun Park

UrbanFoxx
Sign in to follow this  
Followers 0

The first image from my latest project comes from the Orthodox Township of Prowersville. This fun park was built in 1998 as the answer to Taylorsville's legendary "Great Times" amusement park. It has a retail park to the north of it and a planned residential neighborhood to its east. Ever since the Hotels have been built in 2005, Orthodox Fun Park has been pulling in 12 Million Sterlings per year.



Sign in to follow this  
Followers 0

4 Comments

There are tons of roller coasters on the sites....these are just a few on here.  You can almost fill a medium tile with amusement park stuff....

 

 

 

and here's some water park stuff:

 

 

Share this comment


Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an Account  

Sign up to join our friendly community. It's easy!  :thumb:


Register a New Account

Sign In  

Already have an account? Sign in here.


Sign In Now

  •  
  • Similar Content

    • By RandyE
      This lot has been tested in-game, it was found that at least 2 of them are required to almost completely reduce pollution across a large tile as well as to provide water across a grid of pipes covering the whole tile.  It was tested also with the Utility Radius and Traffic Pollution Modd.  Use the Data View and Cheetah Speed to monitor changes in water supply, air and water pollution.  The pump is programmed to consume a very small amount of water so plop the pump in a non-polluted area as tests indicate it will not immediately clean its own base area and may fail to operate. 
      Location: Water Menu under Utilities Menu, and Power Menu for 1x1 Generator
      You must connect both the large water pump and the sewage treatment connectors to realize both the effect of the radical volume of water and the treatment.  The large water pump is the re-lot that will appear in the water utilities.   The dual purpose is combined into one lot with its own unique menu icon. 
      Stats:
      Lot Size: 5 (width) by 6 (depth)
      Water Produced and Treated: 1,000,000 cubic meters per hour.
      Pollution Reduction: -1200 over 300 
      Plop Cost: 25,000§
      Maintenance Cost: 10§
      Jobs: 15§, 290§§, 15§§§
      Moderate Landmark and Park Effect. 
      Transit and Network Enabled
      Power Consumed:  200 MWh (megawatt hours)
      Dependency: Included base texture .dat file.
      Maxis Night-lighting
      FOLDER: Radical Water Pump and Pollution Reduction V1
      File: List of Alternate Water Systems.txt
      File: Preview and Install.html
      File: Readme.txt
      SUB-FOLDER: Radical Water Pump and Pollution Reduction
      This is the folder inside the unzipped title folder to be placed in your User\Documents\SimCity 4\ Plugins folder.  It contains 2 files: 1. the Radical_Water_Pump.SC4Lot, and 2. the BaseTexturesElements_RadicalWaterPump.dat file with base textures extracted from my Vol.1 Base Textures Elements package.  If you use the larger package then delete the smaller .dat file included as the textures don't need to be loaded twice.  The larger package is linked below:
      Base Textures Vol 1.1: Elements, for SC4 1.1.0
      SUB-FOLDER: 500 MWh Power Generator 1x1
      File: RadicalWaterPump_PowerGenerator.SC4Lot
      I've added a 1x1 lot to generate power for the water pump.  If you use the Data View Moisture Mod to locate a high volume of water it may be in a remote area, otherwise a non-polluted area may also be in a remote area.  The power generator is equal to 2½ times the wind power plant.
      Previews:
      The 2nd preview shows the progressive reduction of air pollution; the reduction of water pollution is about the same. The test city has 2 heavy industry areas and congested traffic generating severe pollution over the entire tile. A third radical water pump would completely eliminate both across the entire tile.
      The 3rd preview shows at bottom Cori's Data View of Moisture mod which uses the radiation data view to show changes in moisture from rainfall.  In more complicated terrain the moisture data view is useful to see where to place water pumps which depend on aquifers. The mod is linked below:
      Cori's DataView - Moisture v 2017.01.22 by @CorinaMarie
      The top 2 frames show the progressive increase of water-flow over the entire tile.   Water pipes are tedious to place in large tiles requiring about a 30x30 grid.  To make the task of watering the tile easier use the Utility Radius and Traffic Pollution Reduction Modd by RalphaelNinja linked below:
      UtilityRadius TrafPollution Modd by @RalphaelNinja
      The last preview is of this .SC4Lot in production in the Lot Editor for anyone who has enjoyed using SC4 as a design tool, creating .SC4 city tiles, and who may be considering taking the next step of creating .SC4Lot files.  Using Lot Editor is not much more complicated.  Below is the tutorial that got me started almost a year ago.
      Lot Editor: Beginner's Tutorial by @jbbry232
      INSTALL:
      To install copy and paste the Radical Water Pump and Pollution Reduction folder into your User\Documents \SimCity 4\Plugins folder. 
      To also install the power generator copy and paste the 500 MWh Power Generator 1x1 folder into the folder above.
    • By Glenni
      The former headquarters of NeXcoM Ltd, Steinlia 21 has fallen into disrepair, attracting a number of seedy businesses, including a kebab store which has repeatedly violated health laws. Plopping this building may result in the reduction of surrounding desirability.If you want neighbourhood ruining buildings,this is the one for you.

      Stats:
       
        272           Wealth Low Wealth    
    • By Joe_Winko_From_YouTube
      I hope this makes sense, but say you have a bunch of cities in a huge region connected, do the sims ever travel between them? like if a sim in one city needs a job, and the city next to it has plenty of industrial and commercial zoning, will the sim be able to drive over there to work? 
      I always see cars in the cities going in and out of the city. does it really work that way? 
      and also, why else would sims travel out of the cities? 
    • By CorinaMarie
      This mod stems from the discussion in my Pedriana Plants Killer Modd - Buggy Water Zots? topic. I discovered that while the Pedriana Plants Killer Modd does prevent new ones from growing it has two side effects not mentioned. Namely, because the 5 base lots it blocks are set to either stage 15 or stage 255 this prevents those lots being used by other farms as well. Also, as @twalsh102 discovered in the aforementioned thread this also causes them to be above the stage 3 cap for requiring water. So, existing Pedriana's Plants that were already grown and doing fine will then need a water connection with that mod installed.
      I went a completely different route and simply extracted the single building exemplar and changed the OccupantGroups to 0x00001006 (Building:Park) such that it will no longer grow, but also there are no ill side effects to the existing ones in the game.
    • By CorinaMarie
      In this post by @RippleJet we find that HAVOC Baby Chicks Free Range Eggs has that empty lot syndrome as a growable.
       
      Here's how it looks when grown:

       
      Works fine as a ploppable landmark:

       
      Using the more complete Growing Empty Lots and How to Correct them guide on Devotion's site (ours here on ST is missing section 3b) I've poked around in the related exemplar using iLive's Reader:

       
      First thing I did was zero out the Parent Cohort:

       
      Then deleted the Building/prop Family:

       
      Added Exemplar Type as value 2 (Buildings):

       
      Added Purpose as value 5 (Agriculture):

       
      Refreshed it to see the affect of my changes:

       
      Then I saved it, closed Reader, re-opened it in Reader to be sure the changes were there. (And they were.) Now the silly thing won't grow in my game at all. It's still ploppable as a landmark tho.
      Here's what SC4DataNode has to say about it:


       
      I suspect what DataNode is showing is for the missing Random Billboards props mentioned in the lot file's ReadMe. (I've tried every Billboard download on the STEX, but that's a separate issue I'm not concerned about if I can't get the building to grow.)
      So, what steps have I missed? I felt like I followed the guide and made all the needed changes, but all I did was make it go away and not grow at all. I could've done that easier by just deleting the whole thing.
  • Recently Browsing   0 members

    No registered users viewing this page.