• Moose
  • Announcements

    • Dirktator

      Please help us for July   06/30/2017

      This month we're hoping for a little bit of a boost this month or next, in addition to covering the regular bills, we could benefit from some hardware upgrades. STEX Collector's Set gifts can now be sent to you via digital download as well as regular mail if you wish! Every donation dollar goes toward keeping Simtropolis online and humming along. Your contribution counts! Hardware Upgrades As our website community software improves with more and more features, and as we bolt on additional features such as chat, the increased load to handle all these new toys is taking the server a bit to task. You may have noticed that we'd been forced to temporarily disable the chat as we worked out allocating resources for more optimal performance. Following this, we've applied a number of 'soft' changes such as caching options and experimented with server configurations (nginx as proxy, for example), so the hardware aspect is also an area we'd like to focus on. The last time we upgraded hardware was back in 2012, prior to the release of SC13. Your contribution means a lot! Your donation will go toward helping us to 1.) migrate to a newer server or 2.) at least get some ram/cpu/storage updates and any other infrastructure hardware or services. Donate and Get a Gift or Donate Any Amount Thanks so much! - Dirktator & The Admins
Jose26x

How to create the pink pedestrian walkway for my train station mod

4 posts in this topic

Hello friends I am creating a train station, but I have a problem.
The train station is not functional.

I'm replacing esista station I can not make it work,

How can I make it work and what modito do I need.

I also want to change the default entries that the original mod brings.

 

 

GqDLjTv.png

 

How can I replace this?

 

GRWMn2W.jpg

 

YEebGXO.jpg

 

With this

 

TR461gj.jpg

Share this post


Link to post
Share on other sites

You can do it with Modtools. I'm not sure if there are any other tools. Open your asset in asset editor. then open the Mod Tools Console (F6) and paste this script into the command line:

https://gist.githubusercontent.com/boformer/cf7a59a71a845079ba40/raw/1b7eba305fe7a727f4c199d6fa98dd1a83d7f74f/extra-script-to-remove-all-pedestrian-connections.cs

The script will delete all pink pedestrian paths.

Now use a mod like "Advanced Building 0.2" to place new pink pedestrian connections.

 

 

Jose26x likes this

Share this post


Link to post
Share on other sites
2 hours ago, boformer said:

You can do it with Modtools. I'm not sure if there are any other tools. Open your asset in asset editor. then open the Mod Tools Console (F6) and paste this script into the command line:

https://gist.githubusercontent.com/boformer/cf7a59a71a845079ba40/raw/1b7eba305fe7a727f4c199d6fa98dd1a83d7f74f/extra-script-to-remove-all-pedestrian-connections.cs

The script will delete all pink pedestrian paths.

Now use a mod like "Advanced Building 0.2" to place new pink pedestrian connections.

 

 

Hi, Thanks that was what I needed, pornto publish the mod, thanks again, I knew I could count on simtropolis.:thumb::D

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an Account  

Sign up to join our friendly community. It's easy!  :thumb:


Register a New Account

Sign In  

Already have an account? Sign in here.


Sign In Now


  •  
  • Similar Content

    • By Czardus
      I've started a new project:  Capilano Islands.  I'll be posting videos to my YouTube channel as I progress, along with additional background info on my blog.  Here's the first update!
      Blog post:  Capilano Islands - Starting Terraforming
       
    • By Roadman20
      Entry 1: Beginnings of Seattle, Washington... and early setbacks/rebuilding.
      Hello everyone!
      As most of you know by now, I've been showing off bits and pieces of my work in progress of building Seattle, Washington for Cities:Skylines.  I feel it is time for me to consolidate my progress work in a CJ place so I can share and you see my continual work in as close of an interesting city.  Some background on myself, I've loved SC4 finally came back to the city simulator world when Cities:Skylines came out.  My decision to build Seattle is due to living in the Pacific Northwest, although not in the city itself, for a number of years and the challenge it presents to a city planner. 
      So without further ado, presenting Seattle!
      I took Steam workshop map of Seattle and then I roughly recreated the regional highway network.  This work goes back sometime before After Dark.

      It was here that began my work on perfecting multi-level interchanges with the signature work on the Interstate 5 and Interstate 90 interchange.  This is first version built in map editor, obviously not perfect.  You'll see throughout this journal the gradual improvement on this design, which influences how I build interchanges now.

      As you can see, learning the finer details of onramp/offramp placement is pretty key to making good looking interchanges.  Too bad there was not any retaining walls at the time...

      Oh hey, look sunken wall assets are made.  This was my first real test of using them to prop up a hill slope while using duckclog's pillars. Unfortunately, I only had a single save file at this time of Seattle and the save file was corrupted.

      Well, it was a learned lesson to have two save files of that ever went down again... but the corrupted file incident provided an opportunity to rebuild in a more correct way.  I started Seattle again in the southern industrial heart near the I-5/I-90 interchange and made some immediate build changes. 
      First, Holgate Street Bridge and rebuilding Interstate 5 as elevated viaduct highway as it should be through this area.  

      Second, rebuild western termius of Interstate 90 near Safeco and Century Link Fields.

      Rebuilding the Interstate 5/Interstate 90 interchange in it's third and final configuration.  Sorry about the quality of this particular shot... As noted that new placement means a new alignment of the rest of Interstate 90 northward eventually.  Note that Interstate 5 is fully elevated now throughout this shot compared to earlier shots.

      Finally, overview of Pioneer Square, Sodo, and Industrial Districts.  Plus, early work on Seattle CBD layout.

      Next time, the challenge of building Interstate 5 through the Convention Center.
       
    • By richiesaputra
      for full video here : 
       
    • By Horus_Kol
      So, I've been importing maps to the map editor after getting them pretty much how I want in a graphics editor. So far my chain has been:
      Download from terrain.party (produces 8-bit grayscale PNG) Apply some curves in GIMP (still 8-bit grayscale) Convert to 24-bit grayscale in IrfanView and apply a bit of blur Import into C:SL The result is still a bit lumpy - and the smoothing tool is a bit heavy-handed/uneven.
      I suppose, what would be useful, is if there were a way to smooth the whole map in the editor at once - or a better method of producing the 24-bit image
    • By bonzibuddy
      How do you create articulated buses in this game? It looks like there was a mod but the author is AWOL and hasn't been working since 1.6.
  • Recently Browsing   0 members

    No registered users viewing this page.