• Moose
  1. Hotwheeler

    Hotwheeler

  2. AsimPika3172

    AsimPika3172

  3. JP Schriefer

    JP Schriefer

  4. simmytu

    simmytu

  5. nos.17

    nos.17

  6. CT14

    CT14

  7. tariely

    tariely

  8. Simmer2

    Simmer2

  9. korver

    korver

  10. metasmurf

    metasmurf

  11. MushyMushy

    MushyMushy

  12. Alan Waters

    Alan Waters

  13. SimCoug

    SimCoug

  14. Urban Constanta

    Urban Constanta

  15. MissVanleider

    MissVanleider

  16. Fantozzi

    Fantozzi

  17. bobolee

    bobolee



  • Announcements

    • Dirktator

      04/28/2017

      We're getting close with our April goal - please help us over the final bump! Your donations not only help keep the site up and running, but also allows us to expand some functionality and upgrade other features of the site periodically to stay current! We're looking for some community support to help us get a new Chat system (as you know our old Chat is no longer supported by IP.Board). A new system promises to give us many more options and all for fairly little cost, relatively speaking. Please help us reach our April goal so we can keep bringing you site improvements as well!  Donate and Get a Gift or Donate Any Amount Thanks so much! - Dirktator & The Admins
  • STEX Featured

  • Similar Content

    • By kingofsimcity
      KOSC Presents: Industrial Revolution Mod - Logistic Filler Set 1
      Introduction
      This is a set of ploppable filler lots for dirty, manufacturing, and hi-tech industry which are designed to add some logistic support to your industrial areas. The set was designed with IRM in mind and as such, utilizes matching bases and walls from that of the original releases.
      Package Overview
      This package contains a set of 15 filler lots: 5 for dirty, manufacturing and hi-tech industrial areas. All the lots have props that are highly randomized. Parked trailers and semi cabs will show up in many different sizes and forms and sometimes not even at all.
      Lot stats are designed to match the original IRM fillers as closely as possible. This includes positioning indicators to help you align the lots with respect to other things around it. Every lot is nearly neutral, with negligible amounts of pollution, no power/water consumption and are maintenance free. All lots are $5 to bulldoze and are extremely cheap to plop ($5 for I-D, $6 for I-M, $7 for I-HT).
      The lots are located in the landmarks menu and clumped together with the original filler sets.
      Install Instructions
      Drop the files in your My Documents/SimCity 4/Plugins folder.
      Dependencies
      Use with the Industrial Revolution Mod and the associated filler sets is highly recommended. If you have the dependencies for those sets, you only need the following.
      IdM - Trucking Essentials HD North American 40ft Semi Trailers Vol. 1 HD North American 53ft Semi Trailers Vol. 1 HD North American Semi Truck Cabs Vol. 1 BSC MEGA Props Misc Vol. 2 Standalone users will also need the following.
      Props
      BSC MEGA Props SG Vol. 1 BSC MEGA Props CP Vol. 1 BSC MEGA Props Jestarr Vol. 1 BSC MEGA Props Jestarr Vol. 2 SFBT Essentials Textures
      Railyard and Spur Textures, Mega Pack 1.02 Credit goes to T Wrecks for the original Industrial Revolution Mod, which served as a template for the lot design of this set, and MushyMushy for the trucks which were the driving forces behind the conception of this set.
      Enjoy!
    • By T Wrecks
      INDUSTRIAL REVOLUTION MOD -
      WALL-TO-WALL INDUSTRY 
       
      Manhattanville Pack 3 by NYBT ABBT
       
      1 - INTRODUCTION/OVERVIEW
       
      After another hiatus, I finally gave myself a push and got around to uploading this one. It marks the 14th upload in the third (and probably final) series of IRM W2W lots based on BAT models made by other artists, this time a mix of dirty and manufacturing industry. Once again, I didn't have too much work with this one because the high-quality 3dsmax BATs in this pack, Manhattanville Pack 3 by NYBT / ABBT were designed to be W2W in the first place. I merely tweaked a few stats, assigned the zones, added a few lot options, and a prop here and there.
       
      The buildings will provide 36 to 140 I-M jobs for your Sims (for details, see lot breakdown below). Most of them will look best among low-rise development; 641 West 131th Street can even be used to "cross" a 4-tiles deep W2W block because it is long enough to face both the street in front and the one in the back.
      As the screenshot shows, there is not much lot design to speak of; the buildings mostly sit snugly on the lot with blank walls to all sides not facing a street/road.
      As usual, here's the list of lots included:
      603 West 130th Street (108 I-M jobs): 2x2 straight, Stage 1 641 West 130th Street (140 I-M jobs):
      2x4 straight, Stage 1 (2 versions) 524 West 131st Street (112 I-M jobs):
      2x2 straight, Stage 1 624 West 131st Street (100 I-M jobs):
      2x2 straight, Stage 1 630 West 131st Street (72 I-M jobs):
      1x2 straight, Stage 1 3247 Broadway (136 I-M jobs):
      2x2 left corner, Stage 1 2x2 right corner, Stage 1 3251 Broadway (128 I-M jobs):
      3x2 left corner, Stage 1 2x3 right cap, Stage 1 In keeping with the other IRM stuff, the job numbers are intended to be in line with Maxis stuff if you use Toroca's Industrial Jobs Quadrupler. Since you cannot zone large coherent areas with W2W industrial and the lots can be complemented with fillers, the resulting job density will, in fact, be not that excessive. For the same reason, growth stages for IRM W2W are generally kept low.
       
      2 - USE
       
      If you extract this archive to your root plugins folder, it should create a folder IRM\IRM W2W Expansion\[NAME OF BAT], where [NAME OF BAT] represents the name of this download item. Within that folder, you will find all the game-relevant files and a sub-folder containing the HTML readme and some screenshot(s).
       
      If you no longer wish to use this download, proceed as follows:
      Bulldoze all lots pertaining to this download Save all the cities and exit the game when you're done bulldozing Remove the associated files from your plugins folder Hint: Just to be sure, I recommend moving the undesired files somewhere else and doing some checks before you delete them permanently. This way, if it turns out you forgot to bulldoze something, you can add it back in temporarily until you're done.
       
       
      3 - DEPENDENCIES
       
      IRM W2W Base Pack
      Since this is an extension to the IRM, all the dependencies of the original IRM base pack still apply.
       
      In addition to this, you'll need the original upload of the BAT to see the building:
      NYBT ABBT Manhattanville Project (3rd Pack). Only the .sc4model files are required.
      If you want to have the option of blocking the enclosed lots from growing temporarily, for example when you want to go back to regular (i.e., non-W2W) IRM industry for a while, you can use the IRM W2W Expansion Blocker v 3.0 (or higher) from November 22, 2016 (or later).  
      RECOMMENDED DOWNLOADS

      Industrial Revolution Mod I-D Addon Set 1 for more I-D mech & out lots
      Industrial Revolution Mod I-M Addon Set 1 for more I-M mech & out lots
      Industrial Revolution Mod I-D Filler Set 1 to dress up I-D areas to your liking using ploppable fillers
      Industrial Revolution Mod I-M Filler Set 1 to dress up I-M areas to your liking using ploppable fillers
       
      4 - FINAL WORDS
       
      Credits to the NYBT ABBT guys for these BATs!
       
      T Wrecks, April 23, 2017
    • By T Wrecks
      INDUSTRIAL REVOLUTION MOD -
      WALL-TO-WALL INDUSTRY 
       
      Manhattanville Pack 2 by NYBT ABBT
       
      1 - INTRODUCTION/OVERVIEW
       
      After another hiatus, I finally gave myself a push and got around to uploading this one. It marks the 13th upload in the third (and probably final) series of IRM W2W lots based on BAT models made by other artists, this time a mix of dirty and manufacturing industry. Once again, I didn't have too much work with this one because the high-quality 3dsmax BATs in this pack, Manhattanville Pack 2 by NYBT / ABBT were designed to be W2W in the first place. I merely tweaked a few stats, assigned the zones, added a few lot options, and a prop here and there.
       
      The buildings will provide 72 to 260 I-M jobs for your Sims (for details, see lot breakdown below). Most of them will look best among low-rise development; 609 West 131st Street can even be used to "cross" a 4-tiles deep W2W block because it is long enough to face both the street in front and the one in the back.
      3259 Broadway is a bit of the exception here: It is much bigger, will look great in a mid-rise environment (see demo screenshot) and can be used as a kind of "end cap" for a 4-tiles deep W2W block, i.e. it will face all three street sides - front, back, and left/right - and sit neatly wall-to-wall with everything around it.
      As the screenshot shows, there is not much lot design to speak of; the buildings mostly sit snugly on the lot with blank walls to all sides not facing a street/road.
      As usual, here's the list of lots included:
      605 West 131st Street (72 I-M jobs): 1x2 straight, Stage 1 609 West 131st Street (100 I-M jobs):
      1x4 straight, Stage 1 (2 versions) 635 West 131st Street (100 I-M jobs):
      2x2 straight, Stage 1 3259 Broadway (260 I-M jobs):
      2x4 left cap, Stage 2 2x4 right cap, Stage 2 In keeping with the other IRM stuff, the job numbers are intended to be in line with Maxis stuff if you use Toroca's Industrial Jobs Quadrupler. Since you cannot zone large coherent areas with W2W industrial and the lots can be complemented with fillers, the resulting job density will, in fact, be not that excessive. For the same reason, growth stages for IRM W2W are generally kept low.
       
      2 - USE
       
      If you extract this archive to your root plugins folder, it should create a folder IRM\IRM W2W Expansion\[NAME OF BAT], where [NAME OF BAT] represents the name of this download item. Within that folder, you will find all the game-relevant files and a sub-folder containing the HTML readme and some screenshot(s).
       
      If you no longer wish to use this download, proceed as follows:
      Bulldoze all lots pertaining to this download Save all the cities and exit the game when you're done bulldozing Remove the associated files from your plugins folder Hint: Just to be sure, I recommend moving the undesired files somewhere else and doing some checks before you delete them permanently. This way, if it turns out you forgot to bulldoze something, you can add it back in temporarily until you're done.
       
       
      3 - DEPENDENCIES
       
      IRM W2W Base Pack
      Since this is an extension to the IRM, all the dependencies of the original IRM base pack still apply.
       
      In addition to this, you'll need the original upload of the BAT to see the building:
      NYBT ABBT Manhattanville Project (2nd Pack). Only the .sc4model files are required.
      If you want to have the option of blocking the enclosed lots from growing temporarily, for example when you want to go back to regular (i.e., non-W2W) IRM industry for a while, you can use the IRM W2W Expansion Blocker v 3.0 (or higher) from November 22, 2016 (or later).  
      RECOMMENDED DOWNLOADS

      Industrial Revolution Mod I-D Addon Set 1 for more I-D mech & out lots
      Industrial Revolution Mod I-M Addon Set 1 for more I-M mech & out lots
      Industrial Revolution Mod I-D Filler Set 1 to dress up I-D areas to your liking using ploppable fillers
      Industrial Revolution Mod I-M Filler Set 1 to dress up I-M areas to your liking using ploppable fillers
       
      4 - FINAL WORDS
       
      Credits to the NYBT ABBT guys for these BATs!
       
      T Wrecks, April 23, 2017
    • By T Wrecks
      INDUSTRIAL REVOLUTION MOD -
      WALL-TO-WALL INDUSTRY 
       
      Manhattanville Pack 1 by NYBT ABBT
       
      1 - INTRODUCTION/OVERVIEW
       
      After another hiatus, I finally gave myself a push and got around to uploading this one. It marks the twelfth upload in the third (and probably final) series of IRM W2W lots based on BAT models made by other artists, this time a mix of dirty and manufacturing industry. Frankly, I didn't have too much work with this one because the high-quality 3dsmax BATs in this pack, Manhattanville Pack 1 by NYBT / ABBT were designed to be W2W in the first place. I merely tweaked a few stats, assigned the zones, added a few lot options, and a prop here and there.
       
      The buildings will provide 72 to 144 I-M jobs for your Sims (for details, see lot breakdown below). They will look best among low-rise development. As the screenshot shows, there is not much lot design to speak of; the buildings mostly sit snugly on the lot with blank walls to all sides not facing a street/road.
      As usual, here's the list of lots included:
      640 West 132nd Street (96 I-M jobs):
      2x2 straight, Stage 1 2x2 right corner, Stage 1 641 West 131st Street (144 I-M jobs):
      3x2 straight, Stage 1 653 West 131st Street (72 I-M jobs):
      1x2 straight, Stage 1 2307 Joe DiMaggio Highway (92 I-M jobs):
      2x2 left corner, Stage 1 2x2 right corner, Stage 1 2311 Joe DiMaggio Highway (108 I-M jobs):
      2x2 left corner, Stage 1 2x2 right corner, Stage 1 In keeping with the other IRM stuff, the job numbers are intended to be in line with Maxis stuff if you use Toroca's Industrial Jobs Quadrupler. Since you cannot zone large coherent areas with W2W industrial and the lots can be complemented with fillers, the resulting job density will, in fact, be not that excessive. For the same reason, growth stages for IRM W2W are generally kept low.
       
      2 - USE
       
      If you extract this archive to your root plugins folder, it should create a folder IRM\IRM W2W Expansion\[NAME OF BAT], where [NAME OF BAT] represents the name of this download item. Within that folder, you will find all the game-relevant files and a sub-folder containing the HTML readme and some screenshot(s).
       
      If you no longer wish to use this download, proceed as follows:
      Bulldoze all lots pertaining to this download Save all the cities and exit the game when you're done bulldozing Remove the associated files from your plugins folder Hint: Just to be sure, I recommend moving the undesired files somewhere else and doing some checks before you delete them permanently. This way, if it turns out you forgot to bulldoze something, you can add it back in temporarily until you're done.
       
       
      3 - DEPENDENCIES
       
      IRM W2W Base Pack
      Since this is an extension to the IRM, all the dependencies of the original IRM base pack still apply.
       
      In addition to this, you'll need the original upload of the BAT to see the building:
      NYBT ABBT Manhattanville Project (1st Pack). Only the .sc4model files are required, plus a descriptor file for a prop - if you don't keep the following file, the little side building on 2307 JDM Highway will not show up:
      NYBT ABBT 2301 JDM Hgwy-0x6534284a-0xdc5ed037-0x5c8398fa.SC4Desc
      If you want to have the option of blocking the enclosed lots from growing temporarily, for example when you want to go back to regular (i.e., non-W2W) IRM industry for a while, you can use the IRM W2W Expansion Blocker v 3.0 (or higher) from November 22, 2016 (or later).  
      RECOMMENDED DOWNLOADS

      Industrial Revolution Mod I-D Addon Set 1 for more I-D mech & out lots
      Industrial Revolution Mod I-M Addon Set 1 for more I-M mech & out lots
      Industrial Revolution Mod I-D Filler Set 1 to dress up I-D areas to your liking using ploppable fillers
      Industrial Revolution Mod I-M Filler Set 1 to dress up I-M areas to your liking using ploppable fillers
       
      4 - FINAL WORDS
       
      Credits to the NYBT ABBT guys for these BATs!
       
      T Wrecks, April 23, 2017
  • Newest STEX Uploads

  • Recent STEX Reviews

  • Recent STEX Comments