• Moose

michiyls UV map fix for Maxis monorail models 1.0.0

(0.00)    (0 Reviews)

1 Screenshot

About This File

Though you wouldn't normally notice it but at least the Maxis monorail models have some UV map (= texture positioning) problems.
Just take a look at the orange rings in the picture to see what this actually means:
Monorail-UV-Map-Fix-Preview.jpg.7ae680a2

This wouldn't be a problem for the average user but since I plan to create some monorail liveries that depend upon a good UV map I had to fix this before I upload any more stuff regarding the default monorail and its skins.

Because the UV map depends upon the actual 3D model, this will conflict with any monorail model-related mods. The single DAT file contains just the S3D files for the engine and the passenger part though, so texture mods are fine (which is the actual purpose).

So, if you enjoy a clean texture positioning, you downloaded some of my work for the monorail liveries (like my first monorail color pack) or just noticed this and you want it to stop, I recommend you to download this.


bobolee and matias93 like this



User Feedback

Create an account or sign in to leave a review

You need to be a member in order to leave a review

Create an Account  

Sign up to join our friendly community. It's easy!  :thumb:


Register a New Account

Sign In  

Already have an account? Sign in here.


Sign In Now

There are no reviews to display.



  • Announcements

    • Dirktator

      04/17/2017

      Your donations not only help keep the site up and running, but also allows us to expand some functionality and upgrade other features of the site periodically to stay current! We're looking for some community support to help us get a new Chat system (as you know our old Chat is no longer supported by IP.Board). A new system promises to give us many more options and all for fairly little cost, relatively speaking. Please help us reach our April goal so we can keep bringing you site improvements as well!  Donate and Get a Gift or Donate Any Amount Thanks so much! - Dirktator & The Admins
  • STEX Featured

  • Similar Content

    • By Bad Peanut
      so I've been waiting for sub buildings to become native so I could finally finish off Flinders Street Station (from Melbourne) here's a quick WIP look - probably will release sometime soonish - maybe next week.

      Let me know what you guys think!



    • By renovare
      I am attempting to install the 1.1.638.0 patch that I need to update to NAM 35. I downloaded, but upon installation am being told it cannot find the "old file". Can someone suggest a next step? Thanks
       
    • By Simmer2
      SM2 Abandoned Train Stop.
      This train stop has been sitting in my hard drive for too long. Time to release it!.
      Best plopped in those seedy parts of town....or industrial areas perhaps.
      Plop cost 3000
      Bulldoze cost 300
      Power req 44
      Capacity 7500
      It still acts as a passenger station plus it will let freight trains go through it.
      No dependencies and as a bonus it is also Maxis vanilla rail compatible.
      Works like a charm!
      Enjoy.
      Simmer2
    • By AmiPolizeiFunk
      Hi Simtropolians,
       
      I'm building my home town, Berlin, with the help of your many mods and assets (I am using 70+ mods and 600+ assets). I started playing Cities:Skylines about 2 months ago and I'm enthused by the activity happening here and in the Steam Workshop. Thank you guys! 
       
      I'm endeavoring to add some of my own custom assets to the Workshop, but I'm new to the entire process. I'm good at photoshop, but I suck at Blender! I booted blender for the first time last week, so I'm at the rough end of a steep learning curve. You guys have been very helpful to get me over a few stumbling points. Now I'm getting ready to publish a couple of items and I'd like to run them by you first. I'm trying to start simple, but even simple objectives seem to morph into week-long efforts. Please let me know how my work can be improved.
       
      I've got a Checkpoint Charlie cooking (check my screenshot stream on steam or on twitter, if you're interested), but let's start with the Rosinenbomber from the Deutsches Technikmuseum:

       
      I found a DC-3 model by Giovanni E and lifted it to the top of the stock library with some prop anarchy:

      I was happy to find a DC-3, but the model has some texture problems (the illumination map is always fully on) because it's an old model and was probably made before After Dark. In wanting to fix the lighting problem, I wound up re-texturing the entire model to specifically be the famous Berlin C-47 "Rosinenbomber," as well as adding some propellers.

      It's starting to look decent in-game, but I still have some shadowing issues that I'm working on around the windows.

      I'd like to improve the body texture so that it looks more silvery and less white in the sun (I'm using PhotoReal3 LUT and Daylight Classic mods).

      Here are my current diffuse and spec maps:

       
      How would I go about improving the look of the body surface? I'd like it to be more shiny and silvery.
       
      My next question is, what is a good approach to make the LOD model?
       
      Thx for looking & thx in advance for your suggestions.
      -Ami
    • By Delta2k5
      I thought it's time to get my own topic running as I started some more advanced, larger project a day ago. Besides the vehicles I created before I started working on some vanilla-style modular airport, based on the vanilla airport and international airport assets. Due to my quiet limited time caused by real life don't expect extra-fast progress
      Still I've got to update my "old" vehicle assets too, but the vehicle editor seems to be kinda messed up since the last patch - anyway I'll look into this too by time as I already promised!
       
      For now I got the following types of buildings planned for this airport set which is heavily inspired by the AC teams set for Sim City 4
      functional terminal block with three "small" gates functional terminal block with two "large" gate non-functional terminal filler pieces with gates terminal piece with control tower (RICO Office) terminal block without gate (RICO commercial low) monorail / (elevated) metro / train terminal pieces terminal block with taxi stands (AD required) terminal block with bus hub (to be connected to the tarmac and without airport functionality - just to connect aircraft stands in some nice way  ) terminal block with road maintenance service building (connected to the tarmac side to simulate road-traffic on the airport  )  
      functional terminal with concourse (4 + gates using sub buildings) "T - style" functional concourse piece (featuring gates on both sides, will probably require network extensions as it has to be entered on foot from the underground using pedestrian "roads") eye candy ends for concourse, left and right  
      eye candy transition piece between one-level and two-level terminals (maybe even RICO - enabled, we'll see) two-level functional terminal blocks (will be a challange to be set up - I try to set the entrances on the upper level, the exits on the lower level) two-level terminal with control tower (probably RICO office + functional (using sub building - I don't know yet if something like this is possible)) large fake-entrance piece for two-level terminals (RICO commercial high) (so especially when using rush hour many people gonna go into this one) monorail / (elevated) metro / train two-level terminal pieces two-level terminal block with taxi stands (AD required) two-level terminal block with bus hub (to be connected to the tarmac and without airport functionality - just to connect aircraft stands in some nice way  )  
      simple helipads with one of each natural disasters helicopters working doppler radar dome (requires ND - a non working version is available on the workshop) stand-alone ATC towers surface movement radar tower some props like (enhanced) vanilla jet bridges, stand guidance displays and other small things which will be pretty Special features:
      rotating radar domes for ATC towers and the radar tower (gotta look into this!) usage of the "vehicle rotor" shader discovered by @Ronyx69 for large glass parts of the terminals (I try to work around the lod-problem) stock-game style as I use the textures and models from the game as my start-point   usage of the "loading screen mods" benefits → as I use the same texture with the same name most of the times it will be loaded only once into VRAM when using this mod - which is great! living airports by the use of RICO settings - which you don't have to use at all (those buildings will work as an landmark if you don't use that mod ) more space between planes and terminals due to longer jet bridges - you'll be able to draw some road in between using the anarchy tool of your choise Downsides:
      jet bridges will disappear after a certain distance as I'll convert them to props. I decided to do so to increase flexibility on creating different terminal types and styles   by using many working two-gate assets ingame the airport will get really congested! That's the reason for me to include non-functional versions too.  
      Later on I might create a mod to enhance the vanilla runways and taxiways. I looked up the networks in mod tools and changed some values to test something which turned out to be possible:
       
      different wide runways (40m up to 65m for realistic regional and international airports - new network meshes needed) more realistic markings with lights on runways (probably by adding more segments to one network, segment[0] would be just asphalt to place some indicator like "20L", segment[1] would be the threshold, segment[2] would contain the dashed line only, segment [3] dashed line + precision marking followed by 2x (segment[2] again, then segment[3]) and finally segment[2] for the whole middle part to start in reverse after  - dunno if that's possible at all) two-way taxiways (for special use-cases) taxiways with "shoulders" (a bit wider than now) and green lights in their middle taxilanes (taxiways with some flat mesh and without dirt-shoulders to be used on aprons. probably just the yellow line with green lights.) more realistic speeds for taxiways and taxilanes I gonna provide one screenshot just to show you the difference:

      On the left you can see the vanilla runway which is about 30m wide + 2m "shoulder" (mesh edge) → 32m footprint. The next ones footprint is 46m wide which would fit most regional/domestic airports. The one on the right is 60m wide which fits for large aircraft like the A380.
      ----------------------------------------snip----------------------------------------
       
      First I gonna take off by showing you some first work I've done before starting this topic. This is going to be the first wall-to-wall terminal building featuring three gates (just like the vanilla airport).
       

       
      I removed the jet bridges and details on the left and right to save some polys and - of course - to get the bounding box right  
      Next step will be to map those filled holes, after this I gonna cut the windows and create some basic interior as those will get some semi-transparent love they deserve  
  • Newest STEX Uploads

  • Recent STEX Reviews

  • Recent STEX Comments

    • For my relots to work properly, you will need to download these dependencies if you haven't already. Most of us use these particular dependencies a lot. All you need to do is search for each in a Google Search and it should either be the first or second result. Please know that some of these downloads are from the LEX site, which will require you to make an account in order to download things from there.
    • Great work and great to see you batting again! I love MKE stuff and remember going to this bar fairly often when I lived there.
    • I want to have these on my game, but I'm really confused about how to do this download, do I have to have all those dependencies? If so, where do I find all of them? Do I just click the pink 'Download File' button, or do I have to find and download those dependencies from somewhere? I'm not good with computers, sorry. Any help on this from anyone will be appreciated. 
    • Great. You stay closely on the IRM but add something new, no repetition. I'll use them for shure. We really should bring some of the newer props into the game, they deserve it.  For RRW (Real Rail Way) users I'd like to mention that eggman121 did the hard work of updating the NCD texture pack and some of the BSC textures to RRW versions. It is downloadable here: http://sc4devotion.com/csxlex/lex_filedesc.php?lotGET=3350 they are a replacement for Railyard and Spur Textures, Mega Pack but only an override for some of the BSC textures (= needed by the original IRM). So keep in mind the eggman121 textures must be loaded after the BSC Mega Textures.
    • @DavidDHetzel: Indeed. They've been sitting on my computer for a while now, but I think it's high time to take them for a spin again.