• Moose

PEG OWW2 RCI Boardwalk Corners 1

(4.63)    (56 Reviews)

2 Screenshots

About This File

This RCI Boardwalk Corner Lots will allow you to wrap the OWW2 Boardwalks around corners while still leaving the adjacent/inland tiles open for RCI development or other ploppable lots. In all regards, properties, costs, etc...  are the same as the other 2x2 RCI Boardwalk lots.

This package contains 2 lots; an inner corner lot and an outer corner lot. Both lots are 2x2 tiles in size

The RCI Boardwalks are actually water lots that are designed to extend in & over the sloped coastal tile & merge seamlessly with OWW2 lots on either side.
This particular method does not allow the use of any props on the lot. Therefore, everything on the lot is rendered as part of the building model. The models are nite-lited... with lighting designed to match the lamp post & lite-tree props commonly used on OWW2 lots.

 ** This lot requires the   PEG-OWW2 Resource Pack 1


All Pegasus files are now legacy content and are no longer officially supported - however support from the wider community can be requested here.
 


Artimus likes this



User Feedback

Create an account or sign in to leave a review

You need to be a member in order to leave a review

Create an Account  

Sign up to join our friendly community. It's easy!  :thumb:


Register a New Account

Sign In  

Already have an account? Sign in here.


Sign In Now

Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
PaPa-J

  • 1
  

Share this review


Link to review
pesto05

  • 5
  

Share this review


Link to review
Oldrogue

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review


  • Announcements

    • Dirktator

      04/01/2017

      We've had to spend on a few extra things for May but you guys have been great in helping us reach those goals! We're still just a bit shy,  if you can help out with a donation, it would mean a lot! And we'll send you a little gift in return.  Help us reach our May goal so we can keep bringing you site improvements as well!  Donate and Get a Gift or Donate Any Amount Thanks so much! - Dirktator & The Admins
  • STEX Featured

  • Similar Content

    • By paeng
      A set of turbulences for your rivers and streams.

      You'll find narrow and wide pieces, both in straight and diagonal versions. They all sit on a 1x1 transparent lot and can be combined with PEG-PPond (Tahoe), PEG-Pond and PEG-Stream or ploppable waters by other creators as well.
       
      LIST OF ITEMS
      Narrow Short Straight Narrow Long Straight Narrow Short Diagonal Narrow Long Diagonal Wide Short Straight Wide Long Straight Wide Short Diagonal Wide Long Diagonal
      Each piece comes in 2 variations that plop at random (16 models all in all).
       
      DEPENDENCIES

      ~ none ~

      Recommended to use with Free Waters Mod.
       
      DEVELOPER NOTES

      The turbulences are batted props (instead of the textures used in Vol 01), so there are less straight edges and a bit of overlap onto the next tile.
      You can combine them with any ploppable water and to some extent also with Pond and Stream pieces, mainly the straight items.
      Some of the pieces are also suitable to make transitions between the various available waters - just be creative and find the right combinations.
      There are no other props on these lots - so you have complete freedom to dress them with any Major Mode Flora that suits your theme.

      The Turbulences and Transitions Volume 01 (texture based) is available to download here.
       
      CREDITS

      Concept & Design: Murimk & Paeng
      Batting: Murimk
      Lotting & Modding: Paeng
       
      SUPPORT

      Should you need support for these items please visit the
      PLEX on the STEX - Community Support

      Productions Forum Thread (no longer available)


      Enjoy!
    • By anotn
      The Aurora is a 30-story residential tower in the neighborhood of Hell's Kitchen in Manhattan. Construction started out in 1988 but as the developer abondened the construction when it was 90% finished, it sat unfinished until 1996. It is now shared-living supportive housing ran by the Actor's Fund under the name Dorothy Ross Friedman Residences.
      This will grow on the New York Tileset on high density residential zones and comes with two corner lots 1x2 and 2x1.

      Stats:


      Dependencies: For proper function of this release you need:
      NYBT Essentials for custom queries. If you choose the Darknite version you will also need SimFox Day and Nite Modd.

      This is rendered with both DarkNite and regular Maxis Nite, note that you can easily change between Darknite and Maxis Nite by replacing the model file with the version you'd like to use. No need for bulldozing any lots before. Just make sure you don't have both DarkNite and Maxis Nite models in your Plugins folder.

      Thanks to Aaron Graham for the modding and Vlasky for helping me test this and of course everyone who have visited my BAT thread in the NYBT board.
       
      Mod edit 28th April 2017 - Fixed formatting
    • By Chief ZDN
      Hello everyone,
      While I don't visit the simpeg.com in my life, I sad with the 2015 SimPeg.com fatal error. The site data is gone. However, Pegasus fans gives the Pegasus' and his friends' mods to the PLEX & STEX staff. But, there is no new mod created by the SimPeg again, The Prop Pox bug maker in the some mods still unfixed (Sorry SimPeg, I'm not hate you. I just send the fact that is on SC4D). We don't see the CDK development again. We don't see the new SPAM that support the CAM, officially.
      But, the reality is changed. I'm not a modder. But I can make the SimPeg revive again. We don't want the SimPeg staff is retired from making the quality mod (if they still can make a mod). We want the SimPeg staff making the mod, again. In this plan, I will show you how the new SimPeg led, what are the vision, what mods we make, and the challenge that we need solved.
      Organization
      The new SimPeg is led by Pegasus or someone with good modding skill (maybe Paeng?). The SimPeg organization structure is (from the level, ascending) Leader, Co-Leader, Secretary, Webmaster, Admin, and Moderator. Co-Leader is needed when the Leader is not in working condition or the Leader leaves from the community. Secretaries are for writing what happened on the community, what the community needed, and more. Moderators aren't splited to 2 parts. SimPeg staff member is same as before, but with some tweaks. Our missions are:
      Making a quality mods Host many of quality CJs Make researches about SimCity 4 and community Make innovation about SimCity 4 And our visions are:
      As the world's biggest SimCity 4 mod creator As the biggest CJ hosting As the biggest SimCity 4 contributor Mod We Want Make
      As a quality modder, we want make many quality mods. But for now, we just want to making the new SPAM that compatible with the CAM, new CDK that uses more modular architecture, and new Utopian BATs (I personally like the SkyFarm).
      Challenge
      I am not a modder. And, I not a senior SimCity player. So, I can't be the SimPeg leader or co-leader. However, there is solution. Either as a member but plan the SimPeg or as a staff member on the SimPeg. You can decide. I'm not hunt the rank. I just want contribute. The experience can't be fully restored. By this, we need creating the new experience that more better than before. The SimPeg is around 10 years old. By this, we need create a new logo. However, my laptop currently not available, so there are 2 options: use the old logo or make the new logo, but created by someone Sorry if I breaking the rules. Sorry if I can't explain more detail. Thank you for your attention.
    • By Chief ZDN
      Sorry if I breaking the rules and sorry if the board is incorrect.
      Hello everyone,
      As far as we know, SimPeg was shutted down in 2015. The cause of shutdown is a big website error and data corruption (this is made the error can't fixed). And now, SimPeg name is filled with other site. In Indonesia where I live, SimPeg is resulting to 'sistem kepegawaian' or in English, employee system, that is used by various institutions, including education institutions. The popular site, regardless of country, should rank first in the search. You can see the screenshot in the attachment.
      Don't forget, the world sometimes not unique. And, I say thank you.


  • Newest STEX Uploads

  • Recent STEX Reviews

  • Recent STEX Comments