• Moose

2 Screenshots

About This File

The Vandy Shipping Company has been bringing your industrial goods to market since anyone can remember. Everywhere you look, Vandy trucks are chugging by with a load of cargo going somewhere. Peer out into the harbor and you are sure to see at least one of their cargo ships loading local freight for transport to some distant port in the region or beyond.

This is a modified version of the original Vandy Shipping lot that has been redesigned for use with the PEG-CDK3-SP Seaport series of lots. It is the first "break-bulk" freight lot in the series designed to handle cargos other than containers.

This new version does NOT replace the original version. You can continue to use the original version with your standard CDK3 industrial styled lots.

The most notable changes in the new version is that the lot is slightly smaller (9x tiles wide instead of 10x tiles)... and the standard CDK3-SP rail tracks extend through the lot. The lot also now has only one driveway that has been centered on the lot... and the transit enabling has been refined to prevent automata from entering the lot and causing potential traffic issues.

Like the original version, the lot is a ploppable medium wealth IND-M with timed props to simulate activity. The ships will come and go throughout the day... as will numerous cargos, trucks and rail cars. All costs and properties are the same as the original lot.

This lot takes full advantage of the established collection of CDK3 & CDK3-SP material... and as such has an extensive list of dependencies. However, the good news is that if you are adding this lot to your existing collection of CDK-SP Seaport series lots, you should already have these required files.

 

** This lot requires the following CDK3 dependency files:

PEG-CDK3 Resource Pack 1
PEG-CDK3 Basics
PEG-CDK3 Ship Pack 1
PEG-CDK3 Vehicle Pack 1
PEG-CDK3-SP Rail Fleet
PEG-CDK3-SP Container Seaport

All Pegasus files are now legacy content and are no longer officially supported - however support from the wider community can be requested here.


draft3dd likes this



User Feedback

Create an account or sign in to leave a review

You need to be a member in order to leave a review

Create an Account  

Sign up to join our friendly community. It's easy!  :thumb:


Register a New Account

Sign In  

Already have an account? Sign in here.


Sign In Now

Guest

  • 5
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
Guest

  • 4
  

Share this review


Link to review
PaPa-J

  • 1
  

Share this review


Link to review
Oldrogue

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
Guest

  • 5
  

Share this review


Link to review
  • Announcements

    • Dirktator

      06/30/2017

      This month we're hoping for a little bit of a boost this month or next, in addition to covering the regular bills, we could benefit from some hardware upgrades. STEX Collector's Set gifts can now be sent to you via digital download as well as regular mail if you wish! Every donation dollar goes toward keeping Simtropolis online and humming along. Your contribution counts! Hardware Upgrades As our website community software improves with more and more features, and as we bolt on additional features such as chat, the increased load to handle all these new toys is taking the server a bit to task. You may have noticed that we'd been forced to temporarily disable the chat as we worked out allocating resources for more optimal performance. Following this, we've applied a number of 'soft' changes such as caching options and experimented with server configurations (nginx as proxy, for example), so the hardware aspect is also an area we'd like to focus on. The last time we upgraded hardware was back in 2012, prior to the release of SC13. Your contribution means a lot! Your donation will go toward helping us to 1.) migrate to a newer server or 2.) at least get some ram/cpu/storage updates and any other infrastructure hardware or services. Donate and Get a Gift or Donate Any Amount Thanks so much! - Dirktator & The Admins
  • STEX Featured

  • Similar Content

    • By Pegasus
      Please note as it was discussed under the PLEX support thread, this file has been uploaded on behalf of Pegasus. It was not available anymore due to the the demise of SimPeg. All the works in this download were created by Pegasus.
      The PEG CSK2 Locks have been updated for use with the PEG PPond Canals and ploppable water. This new lot is a "one lot fits all"... in that it can be used both with the canals and the PPond ploppable water.
      But wait... There's more.  This is also a "2fer" lot... as in 2 for 1... as the same lot now replaces the CSK2 Ocean Lock as well. It can also be plopped along your coastlines and used with the PEG CDK3 & OWW2 coastal collection of lots. That's one less menu icon to scroll around looking for.  [YEA !!]

      * If you are not familiar with these Lock lots, they are used to allow your canals to change altitudes. The PPond ploppable water that is used to make lakes, rivers and streams has waterfall lots for that purpose. However, the Locks are the only viable & realistic way for a canal to traverse down a slope.

      The Lock uses timed props to create an animation effect. During the day, the Lock will change several times from being full to being lowered. Various river Scows will also appear in the Lock.
      Like the original, the Lock will automatically adjust to various heights of the slope. There's no need for precise terrain editing... although the area above and below the Lock should be level.
      The new Lock has been reduced in size to only 4 tiles deep... but it is still 2x tiles wide. The upper-level canal section on the original has been removed so the Lock is not limited to use only with the Canals... and it could also be used with any other type of ploppable water or canal style.

      * Please be sure to consult the Developer's Notes section of the included readme file for details on plopping and using this lot.
      All Pegasus files are now legacy content and are no longer officially supported - however support from the wider community can be requested here.
      Dependency:
       
    • By paeng
      A set of turbulences for your rivers and streams.

      You'll find narrow and wide pieces, both in straight and diagonal versions. They all sit on a 1x1 transparent lot and can be combined with PEG-PPond (Tahoe), PEG-Pond and PEG-Stream or ploppable waters by other creators as well.
       
      LIST OF ITEMS
      Narrow Short Straight Narrow Long Straight Narrow Short Diagonal Narrow Long Diagonal Wide Short Straight Wide Long Straight Wide Short Diagonal Wide Long Diagonal
      Each piece comes in 2 variations that plop at random (16 models all in all).
       
      DEPENDENCIES

      ~ none ~

      Recommended to use with Free Waters Mod.
       
      DEVELOPER NOTES

      The turbulences are batted props (instead of the textures used in Vol 01), so there are less straight edges and a bit of overlap onto the next tile.
      You can combine them with any ploppable water and to some extent also with Pond and Stream pieces, mainly the straight items.
      Some of the pieces are also suitable to make transitions between the various available waters - just be creative and find the right combinations.
      There are no other props on these lots - so you have complete freedom to dress them with any Major Mode Flora that suits your theme.

      The Turbulences and Transitions Volume 01 (texture based) is available to download here and is now also an option when downloading from this entry.
       
      CREDITS

      Concept & Design: Murimk & Paeng
      Batting: Murimk
      Lotting & Modding: Paeng
       
      SUPPORT

      Should you need support for these items please visit the
      PLEX on the STEX - Community Support

      Productions Forum Thread (no longer available)


      Enjoy!
    • By Chief ZDN
      Hello everyone,
      While I don't visit the simpeg.com in my life, I sad with the 2015 SimPeg.com fatal error. The site data is gone. However, Pegasus fans gives the Pegasus' and his friends' mods to the PLEX & STEX staff. But, there is no new mod created by the SimPeg again, The Prop Pox bug maker in the some mods still unfixed (Sorry SimPeg, I'm not hate you. I just send the fact that is on SC4D). We don't see the CDK development again. We don't see the new SPAM that support the CAM, officially.
      But, the reality is changed. I'm not a modder. But I can make the SimPeg revive again. We don't want the SimPeg staff is retired from making the quality mod (if they still can make a mod). We want the SimPeg staff making the mod, again. In this plan, I will show you how the new SimPeg led, what are the vision, what mods we make, and the challenge that we need solved.
      Organization
      The new SimPeg is led by Pegasus or someone with good modding skill (maybe Paeng?). The SimPeg organization structure is (from the level, ascending) Leader, Co-Leader, Secretary, Webmaster, Admin, and Moderator. Co-Leader is needed when the Leader is not in working condition or the Leader leaves from the community. Secretaries are for writing what happened on the community, what the community needed, and more. Moderators aren't splited to 2 parts. SimPeg staff member is same as before, but with some tweaks. Our missions are:
      Making a quality mods Host many of quality CJs Make researches about SimCity 4 and community Make innovation about SimCity 4 And our visions are:
      As the world's biggest SimCity 4 mod creator As the biggest CJ hosting As the biggest SimCity 4 contributor Mod We Want Make
      As a quality modder, we want make many quality mods. But for now, we just want to making the new SPAM that compatible with the CAM, new CDK that uses more modular architecture, and new Utopian BATs (I personally like the SkyFarm).
      Challenge
      I am not a modder. And, I not a senior SimCity player. So, I can't be the SimPeg leader or co-leader. However, there is solution. Either as a member but plan the SimPeg or as a staff member on the SimPeg. You can decide. I'm not hunt the rank. I just want contribute. The experience can't be fully restored. By this, we need creating the new experience that more better than before. The SimPeg is around 10 years old. By this, we need create a new logo. However, my laptop currently not available, so there are 2 options: use the old logo or make the new logo, but created by someone Sorry if I breaking the rules. Sorry if I can't explain more detail. Thank you for your attention.
  • Newest STEX Uploads

  • Recent STEX Reviews

  • Recent STEX Comments

    • Thanks, T Wrecks...rewards are such a giant pain to make! So I usually try and put something daft in to try and compensate...this is my nod to the g20 . As far as I know, the OG doesn't do anything, but there is an ATR file in sim city1. dat  (I think it's 0x49a59e37 - 0x01601900), but it might have been deemed a bit too graphic, or it could just have been like the other dozen or so atr files that aren't used in anything....   Oh, and btw, citybuilder234, the building looks like whatever I tell you it looks like.....
    • It doesn't even look like a convention center. Looks like a building at a community college or a state university.
    • Wow, what a fantastic building! I like the intricate shapes of this one, and the many different areas. There are so many details to take in that it really takes a while to grasp the entire structure. I also agree that there's not much going in in terms of conference centres, so this really fills a gap. Kudos for all the reward modding too - I know that part is pretty tedious und ungratifying work (unless you're some sick masochist ). What I also like is how well the lot complements the building, and it acomplishes that with so few and so simple means. Just a few default overlays and props, and we have a lot that leaves nothing to be desired. The one tiny suggestion I have is that all your recent buildings have had their names (and, in cases like this one, also their function) baked into the model. This is not bad generally because it allows a better visual appearance, but sometimes it limits flexibility a bit. The building in question could totally double as a modern city college, for example, or maybe even as a university (not all modern universities are sitting on a lush campus, after all!), but then there's the "Convention Center" lettering in front. I guess it can be covered with cleverly placed flora props... Fun fact: I never knew that there was an Occupant Group "burning dude maker" - what the...???